Ronco Plastics 26H - 13 Gallon Recessed End Dump RV Holding Tank With Rails

Thirteen gallons is an honest weekend of gray water for two people, and the 26H is Ronco's compact way to carry it. At 16 lb out of the mold it is an easy tank to handle solo through a retrofit, and its moderate proportions make it the pick when the bay is ordinary - no extreme length, width, or shallowness driving the choice.

Before you commit, pull the drawing. Every Ronco holding tank page includes the maker's dimensioned drawing, and with a tank in this middle size the drawing is how you confirm clearance around gate valves and vent stubs.

The 26H shares its capacity class with the 46H, a 13-gallon wide slab at 52 x 30 x 8 inches, and sits one step below the 40H at 14 gallons. The whole capacity ladder is browsable in the RV holding tanks category, and the maker's full line at the Ronco Plastics hub.

Strictly waste service - gray or black water, never fresh. Expect about 108 lb of contents at full. Rotomolded in Tustin, California, where Ronco has operated since 1974. One Source Plastics is an authorized Ronco Plastics dealer.

Fittings

This holding tank ships with its outlet molded in, ready to plumb. Add the Ronco 3-inch uniseal (F3UNISEAL), a loose pipe-to-tank seal you press into the outlet yourself, with no threads or nuts.

Technical drawing: download the Ronco Plastics 26H dimensional drawing - print it to plan your install. The outlet is molded in. Add the Ronco 3-inch uniseal to connect it.