Seventeen pounds. Among Ronco's crowded field of 20-gallon holding tanks, the 65H is the lightest blank - a full-size waste tank you can carry under one arm up a ladder into a mid-build coach. For mobile installers and one-person shops, that handling difference is not a footnote; it is the reason to order this mold number over its heavier siblings.
Light refers only to the empty blank: in service the 65H holds the same roughly 167 lb of gray or black water as every other 20-gallon tank, and its polyethylene wall is molded for exactly that duty. What it is not is a potable tank - the H series carries no fresh-water rating, full stop.
If your priorities run the other way, the 13H is the standard-build 20-gallon body, and the 102H offers 20 gallons from the newer 100-series molds. All the 20-gallon shapes - and everything from 7 to 50 gallons - are in the RV holding tanks category.
Rotomolded in Tustin, California, as Ronco has done since 1974, with your fittings installed before shipment: print the drawing below, mark your fitting locations, and select spin-weld or threaded on the order. OneSource Plastics is an authorized Ronco Plastics dealer.
Technical drawing: download the Ronco Plastics 65H dimensional drawing - print it to plan your install and mark exactly where you want fittings located; Ronco installs spin-weld or threaded fittings to your marked spec.
Freight
LTL freight is quoted to your ZIP with the freight cost estimator or by phone at 866-418-1777. The listed price is before freight.
See this tank
Interactive 3D model with live fill. This tank has an interactive 3D model built to its manufacturer dimensions. Rotate it, and set a fill level to see how much liquid it holds at any height. Open the 3D view on the product photo above. Download the 3D model (GLB).
Ready to order?
Add it to your cart at the top of this page, get LTL freight to your ZIP, request a written quote, or call 866-418-1777. The listed price is before freight.
