The Enduraplas 2520 Gallon Vertical Liquid Storage Tank is a large-footprint polyethylene tank built for bulk water storage, holding 2,520 gallons in an 86-inch-tall body on a 110 x 110 inch square base. It is the tank operators reach for when a rural fire-water reservoir, a rainwater or process-water reserve, or a reuse-train holding stage needs real volume in a stable, low-profile vessel that sits flat on a prepared pad.
Will it work for your site
Plan the base before the tank arrives. Filled with water this tank carries roughly 21,017 pounds across its 110 x 110 inch footprint, so it belongs on an engineered, level pad rated for that load - a partially supported or uneven base is the fastest way to stress the wall. Our concrete pad sizing guide walks through the ACI 360R-10 framework for above-ground poly tanks. If you are still confirming volume against your draw and refill cycle, run the numbers through our Tank Sizing Calculator and Tank Sizing Guide before you commit.
Water service and specific gravity
This is a water-service tank, and the 21,017-pound filled figure reflects water at a specific gravity near 1.0. If you are planning to store anything denser than water, confirm the specific-gravity rating for this unit before you order - a heavier liquid changes the wall loading, and matching the tank's SG rating to your fluid is the single most important check for long-service storage.
Fittings and connections
Per the technical drawing on this page, this tank is configured with a 3-inch bolted fitting and a 16-inch lid. The bolted outlet gives you a serviceable connection for supply or drain plumbing, and the 16-inch lid opens the top for fill, inspection, and level checks. Before you order the mating flange or valve, verify the bolt circle and gasket seal of the 3-inch bolted bulkhead against the drawing, and confirm the 16-inch lid gasket suits your service so your plumbing lands where you expect it.
Sizing it into a system
This size sits in a useful band for private fire protection and water reuse work. If you are building a rural or remote fire-water reserve, our NFPA 22 reservoir design guide covers sizing discipline and cold-climate freeze protection. For grey-water, rainwater, and condensate aggregation, the industrial water reuse topology guide shows where a bulk vertical storage tank fits in a quality-banded train.
This 2,520-gallon vertical storage tank ships by LTL freight, quoted to your ZIP - get a live number from our Freight Cost Estimator or call 866-418-1777 and our team will size the freight and connections with you. For deeper background on long-service storage, see our guide to HDPE tank wall thickness and ASTM D1998 sizing.
