The Chem-Tainer 110 Gallon PP Cylindrical Open Top Tank (SKU TC3036AB) is a natural white open top tank molded in polypropylene, standing 36 inches tall on a roughly 30-inch outside diameter with a 30 x 30 inch footprint. The open top gives you full overhead access for hand-loading, mixing, batch dipping, or drop-in immersion work where a closed dome would only get in the way. If you have been searching for a white open top tank in the 110-gallon range, this is a straightforward, honest fit.
Will it work for your job
Size around the core numbers. This open tank holds 110 gallons inside a 30 x 30 inch footprint, so it sets onto a modest pad or bench without eating up floor space. At capacity, plan for roughly 917 pounds of full water weight bearing straight down on whatever supports it. That figure drives most of your installation decisions: empty, the tank is light enough for one person to position and level by hand, but once it is full it must not be moved or shifted. Set it on a flat, continuous surface that fully supports the entire base so there is no stress at the wall-to-floor radius. This is an atmospheric, vented open top format, not a sealed or pressurized vessel. If you are unsure whether 110 gallons matches your batch or holding cycle, run the numbers through the Tank Sizing Calculator or read the Tank Sizing Guide before you commit.
Polypropylene and what to plan for
This tank is molded from polypropylene rather than standard polyethylene, which changes how it behaves on temperature and rigidity, so match your intended service to the OEM material data rather than assuming it acts like a typical poly water tank. Because it ships as an open top, plan a lid or cover separately if your job needs to keep out debris, dust, insects, or evaporation. Confirm the fitting layout with us before you plumb anything, since this unit ships without a predefined fitting package. For a permanent above-ground setup, the concrete pad sizing framework walks through the ACI 360R-10 approach and is a sensible reference at 917 pounds of full weight.
This tank ships LTL freight from the Chem-Tainer plant in West Babylon, New York, with the rate quoted live to your ZIP code against the empty tank's 30 x 30 x 36 inch dimensions. Get an exact number in seconds with the Freight Cost Estimator, or call 866-418-1777 and we will walk you through sizing, fittings, and delivery. One Source Plastics, listed price before freight.
