Skip to main content

Chem-Tainer

Chem-Tainer 200 Gallon Vertical Storage Tank

$759.00
0
(No reviews yet) Write a Review
Adding to cart… The item has been added
SKU:
TC3172IC-NAT
Availability:
In Stock - Ships from nearest manufacturing plant
Weight:
70.00 LBS
Width:
31.00 (in)
Height:
72.00 (in)
Depth:
31.00 (in)
Capacity:
200 Gallons
Material:
Polyethylene
Color:
Natural White
Diameter:
31"
Lid/Manway:
8" Threaded Vented Lid
Specific Gravity:
1.5
Max Temperature:
120° F / 48° C
Certifications:
FDA Approved
Warranty:
3 Year Warranty
Freight Class:
300
Manufacturer Part Number:
TC3172IC-NAT
Manufacturer:
Chem-Tainer
Technical Drawing:
https://onesourceplastics.com/content/chem-tainer-technical-drawings/tc3172icnat.pdf
Ship Weight:
70 lb
Ship Dimensions:
31" L x 31" W x 72" H (crated)

The Chem-Tainer 200 Gallon Vertical Storage Tank (SKU TC3172IC-NAT) is a natural white polyethylene tank built for indoor or outdoor bulk water storage where a small footprint matters. It stands 72 inches tall on a 31 x 31 inch square footprint, so it fits tight against a wall or in a pump-house corner while still holding a full 200 gallons. It is the tank people mean when they search for a 200 gallon vertical storage tank rather than a sprawling horizontal or a low, wide tank.

Will it work for your job?

At 200 gallons of water this tank carries roughly 1,668 pounds. The shell also holds a specific-gravity rating of 1.5, which means the wall is built to carry denser-than-water liquids up to a maximum rated contents weight near 2,502 pounds. This particular unit is configured for water service, so 1,668 pounds is the load to plan around. Use our Tank Sizing Calculator and Tank Sizing Guide to confirm the capacity and the 31 x 31 inch footprint line up with your available space before you buy.

Set it on a proper base

Vertical tanks like this one are designed for full-bottom support, not point loads or spanning a couple of joists. Size the pad for the real load: 1,668 pounds for water, and only up to the 2,502-pound ceiling if you ever run a denser liquid within the 1.5 specific-gravity limit. For an above-ground install, pour or verify a pad rated for that weight; our guide on concrete pad sizing for above-ground polyethylene tanks walks through the ACI framework for getting it right. See the technical drawing on this page for the tank's overall dimensions.

Fittings and outlets

Outlet and fitting configuration is not specified in our current data for this tank, so call 866-418-1777 before you plumb it in and we will confirm bulkhead and outlet size and placement for your setup. If this 200 gallon tank is a reservoir feeding a pump, size the intake and any freeze protection with the same care you would give a larger system.

Freight and how to order

This tank ships LTL freight, quoted live to your ZIP code, from the nearest Chem-Tainer plant to you, either Hanford, CA or Marked Tree, AR, which keeps transit and cost down on both coasts. The listed price is before freight. Get a real number in minutes with our Freight Cost Estimator, or call us at 866-418-1777 and we will quote it by phone and help you confirm this is the right 200 gallon vertical tank for your site.

Freight and documents

Ships from: Marked Tree, AR; Merced, CA. LTL freight is quoted to your ZIP with the freight cost estimator or by phone at 866-418-1777. The listed price is before freight.

Technical drawing (PDF) for Chem-Tainer TC3172IC-NAT.

See this tank

Interactive 3D model with live fill. This tank has an interactive 3D model built to its manufacturer dimensions. Rotate it, and set a fill level to see how much liquid it holds at any height. Open the 3D view on the product photo above. Download the 3D model (GLB).

Ready to order?

Add it to your cart at the top of this page, get LTL freight to your ZIP, request a written quote, or call 866-418-1777. The listed price is before freight.

Adding to cart… The item has been added