Skip to main content

Enduraplas

Enduraplas 100 Gallon White Vertical Storage Tank

$649.00
0
(No reviews yet) Write a Review
Adding to cart… The item has been added
SKU:
THV00100W
Availability:
In Stock - Ships from nearest manufacturing plant
Weight:
66.00 LBS
Width:
30.00 (in)
Height:
43.00 (in)
Depth:
30.00 (in)
Capacity:
100 Gallons
Material:
Polyethylene
Color:
Natural White
Diameter:
30"
Outlet:
2" PP Female NPT Bulkhead Fitting
Lid/Manway:
8" Threaded Vented Lid
Specific Gravity:
1.9
Certifications:
FDA Approved
Warranty:
10 Year Warranty withActivation
Freight Class:
250
Manufacturer Part Number:
THV00100W
Manufacturer:
Enduraplas
Technical Drawing:
https://onesourceplastics.com/content/enduraplas-technical-drawings/enduraplas-100-gallon-white-vertical-storage-tank-thv00100w.pdf
Ship Weight:
66 lb
Ship Dimensions:
30" L x 30" W x 43" H (crated)

The Enduraplas 100 Gallon White Vertical Storage Tank (SKU THV00100W) is a 100-gallon vertical storage tank molded in polyethylene with a Natural White finish.It stands 43 inches tall on a 30 x 30 inch footprint, so it fits a tight pad or a pump-shed corner without sprawling.This is the standard fitment when you are shopping a 100 gallon tank, a vertical storage tank, or simply a 100 gallon Enduraplas unit for liquid storage on a remote or rural site.

Does it work for your job?

Filled with water, this tank carries roughly 834 pounds of contents, so size the pad and any platform for that load before you fill it.It is rated to a 1.9 specific gravity, which means it handles liquids well heavier than water, up to a maximum rated contents weight of about 1,585 pounds at that density.For plain water (specific gravity 1.9) you have substantial headroom.If your liquid's specific gravity exceeds 1.9, or you need a heavier-duty wall, request the next rating up before ordering rather than overfilling this one.Not sure 100 gallons matches your draw and refill cycle?Run the numbers in the Tank Sizing Calculator or read the Tank Sizing Guide first.

Specifications

Capacity: 100 gallons.Dimensions: 43 inches tall on a 30 x 30 inch footprint.Material: polyethylene.Color: Natural White.Specific gravity rating: 1.9.Full water weight: approximately 834 pounds; maximum rated contents weight: approximately 1,585 pounds.Manufacturer: Enduraplas.Outlet, bulkhead, and lid sizes are shown on the technical drawing on this page, so confirm those before buying any bulkhead fitting or gasket, since fitting sizes are not listed in the spec table.

The mistake to avoid

The most common error on a tank this tall and narrow is skipping the pad.A 43-inch column of water on a 30 x 30 base wants a flat, fully supported, level surface; an unsupported or uneven base concentrates stress on the floor of the tank and the lower wall.Pour or set a pad that supports the full footprint before filling.For above-ground polyethylene tanks, our concrete pad sizing guide walks through the ACI 360R-10 framework.Note that 100-gallon vertical tanks ship in more than one profile, so if vertical clearance is tight, compare this 30 x 30 x 43 unit against the taller, narrower 23 x 63 inch 100-gallon profile before you commit to a footprint.

This tank ships LTL freight from the Enduraplas plant in Converse, TX, with the rate quoted live to your ZIP.It ships on a pallet at roughly 30 x 30 x 43 inches and travels empty, so freight is set by the tank's dimensions, not the filled 834-pound water weight.Get a number with the Freight Cost Estimator or call 866-418-1777 to lock in delivery.List price is shown above and is quoted before freight.

Freight and documents

Ships from: Converse, TX. LTL freight is quoted to your ZIP with the freight cost estimator or by phone at 866-418-1777. The listed price is before freight.

Technical drawing (PDF) for Enduraplas THV00100W.

See this tank

Interactive 3D model with live fill. This tank has an interactive 3D model built to its manufacturer dimensions. Rotate it, and set a fill level to see how much liquid it holds at any height. Open the 3D view on the product photo above. Download the 3D model (GLB).

Ready to order?

Add it to your cart at the top of this page, get LTL freight to your ZIP, request a written quote, or call 866-418-1777. The listed price is before freight.

Adding to cart… The item has been added