Skip to main content

Norwesco

Norwesco (1) 1335 Gallon Bolt Down Hoop (3 Required)

$140.02
0
(No reviews yet) Write a Review
Adding to cart… The item has been added
SKU:
N-63642
Availability:
In Stock - Ships from nearest manufacturing plant
Weight:
20.00 LBS
Width:
2.00 (in)
Height:
50.00 (in)
Depth:
70.00 (in)
Material:
Steel
Length:
70"
Freight Class:
LTL
NMFC Code:
178690
Manufacturer Part Number:
63642
Manufacturer:
Norwesco
Ship Weight:
65 lb
Ship Dimensions:
70" L x 2" W x 50" H
Technical Drawing:
https://onesourceplastics.com/content/tech-drawings/n-63642.pdf
Fits Tank:
1315 gal elliptical drainable leg tanks (3 required)
Band Dimensions (A x B x C):
49 3/4" x 63 1/2" x 69 1/2"
Foot Color:
Blue

One bolt down hoop for Norwesco's 1335 gallon tank, three needed per tank

Part number 63642 is a single steel bolt down hoop for Norwesco's 1335 gallon tank. The tank takes three, and the hoop is sold one at a time, so order a quantity of three for a complete set. Each hoop is steel, 70 inches long, 50 inches tall and 2 inches wide, and weighs 20 lb. A bolt down hoop is how a horizontal tank is held to whatever it rides on: the hoop goes over the top of the tank and its feet bolt to the deck, skid or trailer frame below, so the tank cannot lift, walk or roll when the vehicle moves or the load sloshes.

Ordering with the tank? Call 866-418-1777 with the tank part number and we put the tank and three hoops on one order, or add three to your cart above.

What to check before you buy

  1. The tank. This hoop is formed for the 1335 gallon tank. Hoops are not interchangeable between sizes, and Norwesco makes several tanks within a few gallons of this one that take different hoops. Confirm the tank part number with us if there is any doubt.
  2. The count. Three per tank. A partial set puts the whole load on too few hoops.
  3. The deck. The hoop feet need something solid to bolt to. The bolts and the deck plate are part of the mount, not the hoop.
  4. Drawing. Norwesco's drawing for the hoop, linked under Technical Drawing on this page, gives the profile and the foot dimensions for laying out the bolt holes.

Fitting the hoops

Set the tank where it will live and mark the hoop positions from the drawing before drilling. Bring all three hoops up evenly so the tank is held round rather than pinched at one point. Leave a little give: polyethylene swells slightly when it is full and warm, and a hoop cranked down on an empty tank in the morning is overtight by afternoon. Re-check the bolts after the first full load and at the start of each season.

Shipping

Hoops ship LTL, NMFC 178690, each 70 by 2 by 50 inches, 20 lb on the hoop and 65 lb as packed for freight, from the nearest of Norwesco's St. Bonifacius, Minnesota or Washington Court House, Ohio plants. The listed price is before freight and is per hoop; the freight cost estimator gives the lane cost to your ZIP. Ordered with the tank, the hoops travel with it. Count them and look for bent feet before the driver leaves.

‌​‌‌​​‌‌​‌​​‌​​​‌​‌​​‌​‌‌‌​​​‌​​‌‌‌​‌‌​‌

Ships from: Ships with your tank, from the same Norwesco plant.

Freight and documents

LTL freight is quoted to your ZIP with the freight cost estimator or by phone at 866-418-1777. The listed price is before freight.

Technical drawing (PDF) for Norwesco 63642.

See this tank

Product video. Watch the Norwesco (1) 1335 Gallon Bolt Down Hoop (3 Required) video (55 seconds) with dimensions, fittings and shipping notes.

Ready to order?

Add it to your cart at the top of this page, get LTL freight to your ZIP, request a written quote, or call 866-418-1777. The listed price is before freight.

Adding to cart… The item has been added