A 16 inch non-vented lid with collar for Norwesco tanks
Part number 60367 is Norwesco's 16 inch non-vented lid with its collar, moulded in black polypropylene. It closes a 16 inch tank opening with no vent in the lid, for tanks that breathe through a separate vent fitting or that must keep their contents sealed from the air. The lid is 16 inches across and 4 inches tall and weighs 3 lb. Black keeps light off the contents, which slows algae in stored water. The collar is the part that fits the tank opening; the lid closes on the collar.
Replacing a lost or cracked lid? Call 866-418-1777 with the tank part number, or add it to your cart above.
What to check before you buy
- The opening. 16 inch. Measure across the opening on your tank or read the lid size on your tank's page. A lid is one of the few parts where close is not good enough.
- Where the tank vents. This lid has no vent. A tank that is filled and emptied must let air in and out somewhere; if this is the only opening on your tank, you need a vented lid instead. Pumping out of a tank with no vent pulls the walls in.
- Lid and collar, or lid alone. This is both. If your collar is sound and only the lid is damaged, tell us and we will point you to the lid alone.
- Drawing. Norwesco's drawing for the lid and collar is linked under Technical Drawing on this page and gives the collar dimensions.
Fitting it
Clean the tank opening and the collar seat before the new collar goes on; grit under a collar is the usual reason a lid will not sit square. Hand tight is the rule for a plastic lid. Before the first fill, find the tank's vent and make sure it is open; a sealed lid on a tank with a blocked vent does damage on the first draw-down.
Shipping
This part ships by UPS, 3 lb in a 20 by 20 by 20 inch carton, from the nearest of Norwesco's plants in Fairfield, Texas; Griffin, Georgia; Hanford, California; Lincoln, Nebraska; Marked Tree, Arkansas; Owego, New York; Philippi, West Virginia; or Washougal, Washington. The listed price is before freight; the freight cost estimator gives the cost to your ZIP. If you are ordering it with a tank, put both on the same order so they arrive together.
Freight and documents
LTL freight is quoted to your ZIP with the freight cost estimator or by phone at 866-418-1777. The listed price is before freight.
Technical drawing (PDF) for Norwesco 60367.
See this tank
Product video. Watch the Norwesco 16 Inch Non-Vented Lid with Collar video (52 seconds) with dimensions, fittings and shipping notes.
Ready to order?
Add it to your cart at the top of this page, get LTL freight to your ZIP, request a written quote, or call 866-418-1777. The listed price is before freight.
