Skip to main content

Norwesco

Norwesco 200 GALLON STEEL BAND - TWO NEEDED

$60.00
0
(No reviews yet) Write a Review
Adding to cart… The item has been added
SKU:
N-63554
Availability:
In Stock - Ships from nearest manufacturing plant
Weight:
10.00 LBS
Width:
1.00 (in)
Height:
33.00 (in)
Depth:
39.00 (in)
Material:
Steel
Length:
39"
Freight Class:
UPS
NMFC Code:
178690
Manufacturer Part Number:
63554
Manufacturer:
Norwesco
Ship Weight:
10 lb
Ship Dimensions:
38" L x 1" W x 33" H
Technical Drawing:
https://onesourceplastics.com/content/tech-drawings/n-63554.pdf

A steel support band for Norwesco's 200 gallon tank, sold two to a tank

Part number 63554 is the steel band Norwesco makes for its 200 gallon horizontal tank, and the tank takes two of them. A band is the strap that holds a horizontal tank to whatever it rides on: it wraps over the tank, bolts down to the deck or skid on each side, and keeps a full tank from walking, rocking or lifting when the vehicle brakes or the ground shifts. Each band is 39 inches long, 1 inch wide and 33 inches tall as it is shaped, weighs 10 lb, and ships by UPS. The 200 gallons in the name is the tank it fits, not anything the band holds.

Ordering bands with the tank? Call 866-418-1777 with the tank part number and we put both bands on the same order, or get freight to your ZIP and add two to your cart above.

What to check before you buy

  1. The tank. Shaped for Norwesco's 200 gallon horizontal tank. A band curved for another size will not sit flat on the shell, so give us the tank part number if you are not sure.
  2. The count. Two per tank. One band holds the middle and lets both ends move; order the pair.
  3. Hardware. The band is the steel strap. Bolts, washers and any pad between band and tank are yours to supply to suit your deck, unless we tell you otherwise when you order.
  4. The deck. The band holds the tank to the deck; it does not make the deck strong enough. The trailer or truck bed rating, not the band, is usually the limit.

Norwesco's drawing for the band is linked on this page under Technical Drawing. It shows the shape and the bolt foot spacing for laying out your holes.

Fitting it

Set the empty tank in its final position and turn it so the outlet points where the pipe will run. Lay each band over the tank where the drawing shows, mark the bolt holes through the feet, then take the band off to drill. Bolt the bands down snug with the tank empty and check them again after the first fill, because a polyethylene tank settles a little under its first load. Do not crank a band tight enough to dent the shell. Look at the bands and bolts each season and after any hard trip.

Shipping

Each band is a 10 lb piece packed 38 by 1 by 33 inches and travels by UPS from the nearest of Norwesco's plants; ordered with the tank, the bands ride with the tank. The listed price is before freight; the freight cost estimator gives the cost to your ZIP. Sizing the tank first? Use the tank sizing calculator.

​‌‌‌‌​​​​‌​‌‌‌​‌‌​​​‌‌​​‌​‌​‌​‌‌​​‌‌‌‌​‌

Ships from: Ships with your tank, from the same Norwesco plant.

Freight and documents

LTL freight is quoted to your ZIP with the freight cost estimator or by phone at 866-418-1777. The listed price is before freight.

Technical drawing (PDF) for Norwesco 63554.

See this tank

Product video. Watch the Norwesco 200 GALLON STEEL BAND - TWO NEEDED video (55 seconds) with dimensions, fittings and shipping notes.

Ready to order?

Add it to your cart at the top of this page, get LTL freight to your ZIP, request a written quote, or call 866-418-1777. The listed price is before freight.

Adding to cart… The item has been added