A 22 inch vented lid and collar for Norwesco tanks
Part number 63679 is Norwesco's 22 inch lid and collar with an air vent, moulded in black polypropylene. It is the top of a larger tank: the collar is the part that fits the 22 inch opening, the lid closes on the collar, and the vent lets air in and out as the level changes so the tank neither bulges on fill nor pulls in on draw-down. The lid is 22 inches across, about 24 inches over the collar, 4 inches tall, and weighs 6 lb. Black keeps light off the contents, which slows algae in stored water.
Replacing a lost or cracked lid? Call 866-418-1777 with the tank part number, or add it to your cart above.
What to check before you buy
- The opening. 22 inch. Measure across the opening on your tank or read the lid size on your tank's page. A lid is one of the few parts where close is not good enough.
- Vented or not. This lid is vented. A tank that is filled and emptied needs a vent somewhere, and on most storage tanks the lid is where it lives. If your tank vents through a separate fitting and the contents must stay sealed, you want a non-vented lid instead.
- Lid and collar, or lid alone. This is both. If your collar is sound and only the lid is damaged, tell us and we will point you to the lid alone.
- Drawing. Norwesco's drawing for the assembly is linked under Technical Drawing on this page and gives the collar dimensions.
Fitting it
Clean the tank opening and the collar seat before the new collar goes on; grit under a collar is the usual cause of a lid that will not sit square. Hand tight is the rule for a plastic lid. Check that the vent is clear each time you open the tank, because a blocked vent on a tank being pumped out does more damage than a missing lid. If you are sizing the tank itself at the same time, the tank sizing guide is the place to start.
Shipping
This part ships by UPS, 6 lb in a 24 by 24 by 5 inch carton, from Norwesco's Sheldon, Iowa plant. The listed price is before freight; the freight cost estimator gives the cost to your ZIP. If you are ordering it with a tank, put both on the same order so they arrive together.
Freight and documents
LTL freight is quoted to your ZIP with the freight cost estimator or by phone at 866-418-1777. The listed price is before freight.
Technical drawing (PDF) for Norwesco 63679.
See this tank
Product video. Watch the Norwesco 22 Inch Lid and Collar With Air Vent video (57 seconds) with dimensions, fittings and shipping notes.
Ready to order?
Add it to your cart at the top of this page, get LTL freight to your ZIP, request a written quote, or call 866-418-1777. The listed price is before freight.
