The RVB295 holds 52 gallons and ships at 41 lb - a light-duty fresh water molding, listed by Ronco as the B-295 L.D., with one of the best water-to-tank-weight ratios in the book. Every pound of tank wall is a pound of payload you cannot carry as water or gear, and this molding was drawn by people who took that arithmetic seriously.
Fifty-two gallons covers a long weekend for a family or most of a week for two, and it comes in translucent natural polyethylene - FDA approved for potable water, with the level visible straight through the wall.
Light duty means matched to the sheltered, supported life of an RV bay; give the tank a floor that carries its base and the thin-walled efficiency costs you nothing. Molded in Tustin, California, on a line running since 1974.
Close alternatives live in our RV water tank category - the RV8W matches this capacity in a long low format - and the full range is on the Ronco Plastics hub. One Source Plastics is an authorized Ronco Plastics dealer.
Standard fitting package
Choose the standard fitting package for $30 and we install these three fittings before the tank ships:
| Fitting | Size | Location |
|---|---|---|
| Inlet | 1-1/4" female NPT | Top center |
| Outlet | 1/2" female NPT | Bottom center |
| Vent | 1/2" female NPT | Top corner |
Want to place the fittings yourself? Choose the blank tank: it ships with no fittings at no charge. Add the 90-2218 fitting kit ($55.75). It includes an access plate with six stainless steel screws, washers and nuts to mount it, a 1-1/2" NPT plug, two 1/2" NPT plugs, two 5/8" thru-hull fittings for supply and vent, and one 1-1/2" thru-hull fitting for fill.
