The 1 1/2 Inch PVC Flange Adapter from Snyder Industries is a PVC pipe-assembly fitting from Snyder's PVC Adapters line. It carries a 1.5 inch nominal connection and ships at roughly 5 lbs. As a flange adapter, it gives a PVC plumbing run a bolt-up flange transition point.
What it is and where it fits
This is a fitting, not a stored-volume component. Use it where a 1 1/2 inch PVC line needs a bolt-up flange connection. Because it is PVC, it stands up to moisture in the exposed outdoor and washdown conditions common around water-service plumbing. Confirm your line size and mating flange pattern against the 1.5 inch nominal connection before ordering, since flange adapters are not interchangeable across differing flange patterns.
Installation note
Assemble it into the PVC run per your line's method, seat it against the mating flange, and torque the flange bolts evenly in a cross pattern for a flat, even seal. Support the adjacent piping so the joint carries no strain.
This adapter ships from the nearest Snyder plant among Lincoln, NE, Marked Tree, AR, and Philippi, WV. Larger orders move LTL freight quoted live to your ZIP through our Freight Cost Estimator or by phone at 866-418-1777.
