Snyder's stand for a 22 inch tank, with 18 inches of clearance underneath
Part number 1370001N97601 is the smallest Snyder Industries tank stand we carry: it is made for a 22 inch diameter tank and lifts it 18 inches off the floor. The stand is 22 inches long, 22 inches wide and 22 inches tall, and weighs 36 lb, light enough that it ships by UPS rather than on a freight truck. Eighteen inches of clearance is generous for a tank this size. It is room for a bottom outlet, a valve, a hose and a bucket or a small pump under the outlet, which is how most small tanks are used: drained by gravity into something.
Which Snyder tank is it going under? Call 866-418-1777 with the tank part number and we confirm the pairing before it ships, or get shipping to your ZIP and add it to your cart above.
What to check before you buy
- The tank diameter. 22 inches. It is on the tank's own page. A stand for a 22 inch tank carries a 22 inch tank; the next size of tank needs the next size of stand.
- The clearance. 18 inches. Measure what has to fit under the outlet: the fitting, the valve, the hose and the container or pump inlet it feeds.
- The total height. The stand is 22 inches tall. Add the tank height from its page and check the lid height against the bench, the shelf or the person who will fill it.
- The floor. A flat, level 22 inch square. On a bench or a mezzanine, check what is under the boards before you fill the tank, not after.
- Anchoring. No anchor hardware is listed. A small tank on a tall stand is easy to knock; put it where it will not be walked into, or fasten it down.
Snyder's drawing for this stand is linked on this page under Technical Drawing. It is the source for the leg layout, the material and the ring dimensions.
Setting it up
Set the stand where it will live and level it across both diagonals. Set the empty tank, turn it so the outlet points where you want the valve, and fit the valve before the first fill. Fill with water the first time. Support the hose or pipe leaving the valve so the fitting carries liquid, not hardware; on a small tank the weight of a valve and a hose is a large share of the load on the outlet.
Shipping
The stand ships by UPS, 22 by 22 by 22 inches and 36 lb, under NMFC 178690, from Snyder's Marked Tree, Arkansas plant. The listed price is before freight; the freight cost estimator gives the cost to your ZIP. If the tank it carries ships by truck, put both on one order and tell us; we arrange them to arrive together. When it arrives, check the part number 1370001N97601 on the label and look at each foot before you set a tank on it.
Freight and documents
LTL freight is quoted to your ZIP with the freight cost estimator or by phone at 866-418-1777. The listed price is before freight.
Technical drawing (PDF) for Snyder Industries 1370001N97601.
See this tank
Product video. Watch the Snyder Industries 22" diameter stand - 18" Clearance video (53 seconds) with dimensions, fittings and shipping notes.
Ready to order?
Add it to your cart at the top of this page, get LTL freight to your ZIP, request a written quote, or call 866-418-1777. The listed price is before freight.
