Snyder's stand for a 42 inch tank, with 12 inches of clearance underneath
Part number 1750000N97601 is a Snyder Industries tank stand for a 42 inch diameter tank, giving 12 inches of clearance between the floor and the bottom of the tank. The stand is 53.5 inches long, 47.1 inches wide and 29.5 inches tall, and weighs 42 lb. The footprint is wider than the tank it carries, which is the point: the legs stand outside the tank wall and the load goes straight down into the floor. Twelve inches of clearance is a foot of working room under the outlet, enough for a valve, a hose and a hand, and it keeps the top of the tank lower than a taller stand would, which matters when the tank is filled from a ladder or sits under a roof.
Which Snyder tank is it going under? Add it to your cart at the top of this page, get LTL freight to your ZIP, or call 866-418-1777. The listed price is before freight.
What to check before you buy
- The tank diameter. 42 inches. It is on the tank's own page. A stand sized for a 42 inch tank carries a 42 inch tank; a wider or narrower tank needs its own stand.
- The clearance. 12 inches. Measure the outlet fitting, the valve and anything that has to sit under it. Snyder makes a 42 inch stand with more clearance if a foot is not enough.
- The floor space. 53.5 by 47.1 inches, flat, level and continuous, with no drain, slope or slab joint under any leg.
- The total height. The stand is 29.5 inches tall. Add the tank height from its page and check the result against your ceiling and your fill point.
Snyder's drawing for this stand is linked on this page under Technical Drawing. It is the source for the leg layout, the material and the ring size.
Setting it up
Level the stand across both diagonals before the tank goes on. Set the empty tank, turn it so the outlet points toward the pipe run, fit the valve, and fill with water the first time. Support the first length of pipe on its own; the outlet should carry liquid, not plumbing. No anchor hardware is listed; if the site needs it bolted down, that hardware and the floor rating are for your installer.
Shipping
The stand ships LTL on a pallet, 54 by 48 by 30 inches and 50 lb packed, under NMFC 178690, from Snyder's Marked Tree, Arkansas plant. The listed price is before freight; the freight cost estimator gives the lane cost to your ZIP. Put the stand and the tank on one order so they arrive on one truck. At the tailgate, check the part number 1750000N97601 against the bill of lading and look at each leg for a transit knock before you sign.
Freight and documents
LTL freight is quoted to your ZIP with the freight cost estimator or by phone at 866-418-1777. The listed price is before freight.
Technical drawing (PDF) for Snyder Industries 1750000N97601.
See this tank
Product video. Watch the Snyder Industries 42'' diameter stand - 12'' Clearance video (54 seconds) with dimensions, fittings and shipping notes.
Ready to order?
Add it to your cart at the top of this page, get LTL freight to your ZIP, or call 866-418-1777. The listed price is before freight.
