On Ronco's own price sheet this tank is a terse line: "35W L.D. (13 GAL)". Decoded, that is the whole product - the 35W molding, light-duty potable spec, 13 gallons of fresh water. The L.D. designation is Ronco's material call: FDA-compliant natural polyethylene with a translucent wall that lets you read the water level directly, the standard for drinking-water service in an RV.
What the sheet does not say is that this is a substantial molding for its size - 22 lb of polyethylene, a heavier build than most tanks in this capacity class. Filled, add about 108 lb of water on top of that (water is 8.34 lb per gallon), and strap accordingly.
Around it in the fresh line: the RV37W at 14 gallons and 29.75 x 16 x 7.5 inches if you need a defined low-profile footprint, and the RV36W at 17 gallons and 23 x 21 x 9 inches if you can spend a bit more floor. All shapes and sizes are in the RV water tanks category.
Ronco has rotomolded in Tustin, California since 1974, and every tank gets its fittings installed to the customer's layout before shipping - print the drawing below, mark your fitting locations, and choose spin-weld or threaded on the order. OneSource Plastics is an authorized Ronco Plastics dealer.
Technical drawing: download the Ronco Plastics RV35W dimensional drawing - print it to plan your install and mark exactly where you want fittings located; Ronco installs spin-weld or threaded fittings to your marked spec.
Freight
LTL freight is quoted to your ZIP with the freight cost estimator or by phone at 866-418-1777. The listed price is before freight.
See this tank
Interactive 3D model with live fill. This tank has an interactive 3D model built to its manufacturer dimensions. Rotate it, and set a fill level to see how much liquid it holds at any height. Open the 3D view on the product photo above. Download the 3D model (GLB).
Ready to order?
Add it to your cart at the top of this page, get LTL freight to your ZIP, request a written quote, or call 866-418-1777. The listed price is before freight.
