Ronco's maker sheet calls the RV11W "11W L.D. (14 GAL) 21X13X13" - fourteen gallons of fresh water in a 21 x 13 x 13 inch near-cube. That tall, short-footprint geometry is the point: it drops into a locker, a bench seat pedestal, or a galley cabinet void, places where the usual long flat water tanks cannot follow.
L.D. is Ronco's light-duty potable spec: FDA-compliant natural polyethylene, translucent so the water level reads through the wall. The tank itself is 9 lb; the water, at 8.34 lb per gallon, brings a full tank to about 117 lb concentrated on a compact 21 x 13 inch base - so set it on solid floor and run a strap over the top, not just around the sides.
Its closest relative is the RV16W, a 12-gallon cube at 18 x 13 x 13 inches sharing the same cross-section; if your space runs flat instead of tall, the RV37W holds 14 gallons at 29.75 x 16 x 7.5 inches. Every fresh-water shape is in the RV water tanks category, and the same L.D. moldings serve boat installations.
Rotomolded in Tustin, California - Ronco's only home since 1974 - with fittings installed per order: print the drawing below, mark your fitting locations, choose spin-weld or threaded. OneSource Plastics is an authorized Ronco Plastics dealer.
Technical drawing: download the Ronco Plastics RV11W dimensional drawing - print it to plan your install and mark exactly where you want fittings located; Ronco installs spin-weld or threaded fittings to your marked spec.
Freight
LTL freight is quoted to your ZIP with the freight cost estimator or by phone at 866-418-1777. The listed price is before freight.
See this tank
Product video. Watch the Ronco Plastics RV11W - 15 Gallon Plastic RV Water Tank (21.0" x 13.0" x 13.0") video (65 seconds) with dimensions, fittings and shipping notes.
Ready to order?
Add it to your cart at the top of this page, get LTL freight to your ZIP, request a written quote, or call 866-418-1777. The listed price is before freight.
