The 55H buys its 39 gallons with floor area instead of depth: 49 inches long, 24 wide, 10 tall. That low-slung geometry keeps a full waste load - roughly 325 lb of gray or black water - riding close to the chassis, and fits coaches where the underfloor cavity is broad but shallow.
As a shell it is remarkably light, 29 lb of seamless rotomolded polyethylene, so maneuvering it into position under a jacked coach is a one-person job.
Capacity neighbors, for comparison shopping: the 40-gallon 5H runs longer and narrower at 56.5 x 19 x 12.5 inches, the 36-gallon 48H is blockier at 35 x 25 x 12.75 inches, and the 42-gallon 61H adds a side dump at 45 x 24.5 x 12 inches. The full index is at RV holding tanks. Waste service only - fresh water lives in a different resin on the water tank side.
One Source Plastics is an authorized Ronco Plastics dealer.
Fittings
This holding tank ships with its outlet molded in, ready to plumb. Add the Ronco 3-inch uniseal (F3UNISEAL), a loose pipe-to-tank seal you press into the outlet yourself, with no threads or nuts.
Technical drawing: download the Ronco Plastics 55H dimensional drawing - print it to plan your install. The outlet is molded in. Add the Ronco 3-inch uniseal to connect it.
Freight
LTL freight is quoted to your ZIP with the freight cost estimator or by phone at 866-418-1777. The listed price is before freight.
See this tank
Interactive 3D model with live fill. This tank has an interactive 3D model built to its manufacturer dimensions. Rotate it, and set a fill level to see how much liquid it holds at any height. Open the 3D view on the product photo above. Download the 3D model (GLB).
Product video. Watch the Ronco Plastics 55H - 39 Gallon Plastic RV Holding Tank (49.0" x 24.0" x 10.0") video (61 seconds) with dimensions, fittings and shipping notes.
Ready to order?
Add it to your cart at the top of this page, get LTL freight to your ZIP, request a written quote, or call 866-418-1777. The listed price is before freight.
