The Enduraplas 7011 Gallon Vertical Liquid Storage Tank is a large-format polyethylene tank built for bulk water storage, where a single high-volume reservoir makes more sense than a cluster of smaller vessels. It holds 7,011 gallons in one upright body, which fits agricultural irrigation supply, rural fire-water reserves, non-potable bulk storage, industrial process water, and rainwater or reuse aggregation.
Will it work for your site?
Start with the two numbers that govern the install: footprint and full weight. This tank plans out to a 144 x 144 inch (12 x 12 foot) square base, and filled with water it weighs roughly 58,472 pounds. That load rides on the base ring, not spread evenly across your whole slab, so a tank this size needs an engineered, level pad rated for the point load. Our concrete pad sizing guide walks through the ACI 360R-10 framework for above-ground poly tanks. Confirm exact overall height, diameter, and fitting locations against the technical drawing on this page before you pour the pad and set overhead clearance. And confirm your gallon requirement first with the Tank Sizing Calculator and Tank Sizing Guide, so you size the reservoir to real demand rather than nameplate capacity.
Fire-water and reuse service
A 7,000-gallon vertical is a common building block for private fire protection at rural and remote sites, where NFPA 22 sizing discipline drives the stored volume; our fire-water reservoir design guide covers freeze-protection engineering for cold-climate installs. The same tank fits quality-banded water-reuse trains for grey-water, rainwater, and HVAC condensate storage, detailed in our water reuse topology writeup.
The mistake to avoid
This tank is built for water. If you plan to store any liquid with a specific gravity above water, do not assume this vessel qualifies for it, and read our wall-thickness and ASTM D1998 sizing article to understand where large poly tanks actually fail over time. Match the tank to the liquid, not just the volume.
The 7011 ships LTL freight, quoted live to your ZIP through our Freight Cost Estimator or by phone at 866-418-1777. The listed price is before freight. Get a freight rate to your site before you order, so the pad and access are ready when the truck arrives.
