A bolt down hoop for Norwesco's 425, 525, 725 and 1025 gallon horizontal leg tanks, sold one at a time
Part number 60057 is the steel bolt down hoop Norwesco makes for its 425, 525, 725 and 1025 gallon horizontal leg tanks, and this listing is for one hoop. A hoop wraps over the tank and bolts to the deck, skid or trailer on each side, so a full tank cannot walk, rock or lift when the vehicle brakes or the ground moves under it. The hoop is about 48 inches across and 49 inches tall as it stands, weighs 17 lb, and ships by LTL freight. The gallon figures in the name are the tanks it fits, not anything the hoop holds.
Ordering hoops with the tank? Call 866-418-1777 with the tank part number and we put the right number on the same order, or request a written quote for a tank and hoop package.
What to check before you buy
- The tank. Shaped for Norwesco's 425, 525, 725 and 1025 gallon horizontal leg tanks. A hoop curved for another shell will not sit flat, so give us the tank part number if you are not sure.
- The count. One hoop per listing. A horizontal tank wants a hoop near each end so neither end can move; tell us the tank and we tell you how many Norwesco calls for.
- Hardware. The hoop is the steel strap. Bolts, washers and any pad between hoop and tank are yours to supply to suit your deck, unless we tell you otherwise when you order.
- The deck. The hoop holds the tank to the deck; it does not make the deck strong enough. The trailer or truck bed rating is the limit.
Norwesco's drawing for the hoop is linked on this page under Technical Drawing. It shows the shape and the bolt foot spacing for laying out your holes.
Fitting it
Set the empty tank in its final position and turn it so the outlet points where the pipe will run. Lay each hoop over the tank between the moulded legs where the drawing shows, mark the bolt holes through the feet, then take the hoop off to drill. Bolt the hoops down snug with the tank empty and check them again after the first fill, because a polyethylene tank settles a little under its first load. Do not crank a hoop tight enough to dent the shell.
Shipping and receiving
Each hoop is a 17 lb piece packed 48 by 48 by 49 inches and travels by LTL freight from the nearest of Norwesco's plants; ordered with the tank, the hoops ride on the tank's pallet. The listed price is before freight; the freight cost estimator gives the lane cost to your ZIP. At the tailgate, count the hoops against the order. Still choosing the tank? Start with the tank sizing guide.
Ships from: Ships with your tank, from the same Norwesco plant.
Freight and documents
LTL freight is quoted to your ZIP with the freight cost estimator or by phone at 866-418-1777. The listed price is before freight.
Technical drawing (PDF) for Norwesco 60057.
See this tank
Product video. Watch the Norwesco Bolt Down Hoop (1) Each for 425/525/725/1025 Gallon Horizontal Leg Tanks video (53 seconds) with dimensions, fittings and shipping notes.
Ready to order?
Add it to your cart at the top of this page, get LTL freight to your ZIP, request a written quote, or call 866-418-1777. The listed price is before freight.
