Ronco Plastics RV67W - 100 Gallon Light Duty RV Fresh Water Tank

One hundred gallons is where Ronco Plastics' RV fresh-water line tops out, and the RV67W is that flagship: enough water for genuine off-grid living, molded as a 98 lb light-duty shell whose geometry lives on the drawing below. Buyers here are full-timers, desert boondockers, and builders of rigs meant to stay out for weeks.

At the flagship scale the engineering discipline is non-negotiable: a full RV67W carries about 834 lb of water, a load that must sit over frame structure with straps sized to match. The reward is the same spec as every Ronco potable tank - FDA-compliant natural polyethylene, translucent wall for instant level checks, one-piece seamless rotomolding from the Tustin, California plant in operation since 1974.

Fittings install at the factory to your marks, spin-weld or threaded: print the drawing below and mark your fitting locations, or use the click-to-place planner on this page. If a hundred is more than the build needs, the descent runs through the 95-gallon RV66W at 67 x 22 x 16 inches, the 90-gallon RV64W, and the 83-gallon RV70W. Browse RV water tanks and price the haul with the freight cost estimator.

OneSource Plastics is an authorized Ronco Plastics dealer.

Technical drawing: download the Ronco Plastics RV67W dimensional drawing - print it to plan your install and mark exactly where you want fittings located; Ronco installs spin-weld or threaded fittings to your marked spec.