The drawing is the product page for a tank like the RV18W. It is one of Ronco Plastics' several 60-gallon light-duty fresh water molds, a 73 lb shell whose proportions are recorded on the technical drawing below rather than in a catalog line - so print the drawing below, lay it against your floor plan, and mark your fitting locations while you are at it. That is not busywork: Ronco builds each tank with fittings installed to your order, spin-weld or threaded, at your marks.
The spec is the proven one: FDA-compliant natural polyethylene, translucent so the water level is visible through the wall, molded in one piece with no seams. Budget roughly 500 lb for the full 60 gallons when you size the cradle and straps.
Rotomolded in Tustin, California by a company that has done it since 1974, the RV18W sits in a family worth cross-shopping: the 60-gallon RV15W and the 60-gallon RV4W hold the same volume in different shapes, and the 58-gallon RV42W at 46.75 x 20.75 x 15.5 inches gives up two gallons for a published footprint. Everything else: RV water tanks.
OneSource Plastics is an authorized Ronco Plastics dealer.
Technical drawing: download the Ronco Plastics RV18W dimensional drawing - print it to plan your install and mark exactly where you want fittings located; Ronco installs spin-weld or threaded fittings to your marked spec.
Freight
LTL freight is quoted to your ZIP with the freight cost estimator or by phone at 866-418-1777. The listed price is before freight.
Ready to order?
Add it to your cart at the top of this page, get LTL freight to your ZIP, request a written quote, or call 866-418-1777. The listed price is before freight.
