A 3/4 inch PVC flange adapter for Snyder tank fittings
Part number 34700866 is Snyder's 3/4 inch PVC flange adapter. A flange adapter is the piece that joins a flanged tank fitting to ordinary pipe: one face bolts up to the flange on the tank, the other side takes the pipe. It is the part you order when the tank fitting is flanged and the pipe run is not, or when you want a joint you can unbolt for service instead of cutting the line. At 3/4 inch it is a small connection, the size for a feed line, a sample point or a sight gauge tap. The adapter weighs 5 lb and ships by UPS.
Matching it to a fitting? Call 866-418-1777 with the tank part number and the fitting it bolts to, or add it to your cart above.
What to check before you buy
- The size. 3/4 inch, and it has to be the same 3/4 inch as the flanged fitting on the tank. A flange joint only seals when both faces and both bolt patterns match, so tell us the fitting part number and we confirm the pair before it ships.
- The material. PVC suits water and many common chemicals at ordinary temperatures. Check the liquid in our chemical compatibility guide before you order; for hot or aggressive service, ask us about the alternatives.
- The gasket and bolts. None are listed with this adapter. Plan on the gasket and hardware that come with the flanged fitting, or tell us and we add them to the order.
- The drawing. Snyder's drawing for this adapter is linked on this page under Technical Drawing; it shows the face and the bolt pattern.
Installing it
Bolt the adapter to the tank fitting before any pipe is connected, with the gasket seated flat and the bolts pulled up evenly in a cross pattern so the faces close square. Then bring the pipe to the adapter, not the adapter to the pipe; a run that has to be forced into line puts a permanent side load on the tank wall. Support the pipe on its own within a foot of the joint. A flange is the joint you will open later, so leave room for a wrench on every bolt.
Shipping
A 5 lb part in a 12 by 12 by 12 inch carton, by UPS from Snyder's plant in Marked Tree, Arkansas or Philippi, West Virginia. The listed price is before freight; the freight cost estimator gives the cost to your ZIP. If it is going on a new tank, put both on one order.
Freight and documents
LTL freight is quoted to your ZIP with the freight cost estimator or by phone at 866-418-1777. The listed price is before freight.
Technical drawing (PDF) for Snyder Industries 34700866.
Ready to order?
Add it to your cart at the top of this page, get LTL freight to your ZIP, or call 866-418-1777. The listed price is before freight.
