Add-ons and Accessories

The 3 Inch Flexmaster XLPE Flange Connector Assembly from Snyder Industries is a flange-style connector for cross-linked polyethylene (XLPE) tanks, sized to a 3-inch flanged port. It arrives as a complete assembly, so you install one connection point...

This Chemtainer steel stand is the support frame for a 30 gallon cone bottom tank, giving the full-drain cone a stable, elevated base to sit in. The frame has an 18" x 18" footprint, stands 29" tall, weighs 70 lb, and is built around the tank's 15-degree...

The 1.5 Inch Double Flanged Fitting from Snyder Industries is a bolted PVC fitting for through-wall connections on a tank. It carries a 1.5-inch flange, a VITON gasket, and Hastelloy encapsulated bolts, with an outside footprint of about 5 by 5 inches, a...

This is the Snyder Industries 30" diameter flat-bottom tank stand with 12" of clearance - a support structure that lifts a flat-bottom tank off the slab so you can reach the outlet, run a fill line, and inspect the underside. It is a stand only, not a...

The 4 Inch PP Bolted Double Flanged Fitting is a Snyder Industries polypropylene bulkhead assembly for a 4-inch tank penetration. Both halves are molded polypropylene, and the joint is sealed with the EPDM gasket named in the pack. Unlike a threaded...

The Chem-Tainer Steel Stand with Mixer Mount (TC1519CM) is a steel stand built for the 15 gallon Chem-Tainer cone bottom tank, with an integrated mixer mount. It gives the tank a stable, elevated seat so the 15° cone can drain fully from the bottom while...

The 2 Inch DBL Flanged Fitting from Snyder Industries is a bolted double-flanged fitting molded in PVC, with a 2-inch port and a 2-inch footprint. It seals with a VITON gasket and uses Hastelloy encapsulated bolts, so both the sealing face and the...

The 6 Inch CPVC Flange Adapter from Snyder Industries is a pipe-assembly fitting, not a storage tank. It is a flange adapter with a 6-inch connection, built to mate a 6-inch line into a flanged pipe joint. Empty weight is about 5 lb, with a...

The TC2236AM is a Chemtainer steel tank stand with an integrated mixer mount, sized to seat a 55 gallon cylindrical flat-bottom tank. The steel frame measures 25 x 25 x 25 inches with a 25 x 25 inch footprint and weighs 52 pounds empty. It is a support...

The Steel Stand w/ Mixer Mount for 28 Gallon Chem-Tainer Cylindrical Tank is a steel support frame that cradles a 28-gallon Chem-Tainer cylindrical tank at working height, with a built-in mount for a top-side mixer. This is a stand only, not a tank. It...

The Steel Stand with Mixer Mount is a bolt-together steel frame built to hold a 40 Gallon Chem-Tainer cylindrical (flat-bottom) tank, with an integrated mount for a mixer. It has a 25 x 25 inch footprint and stands 25 inches tall, giving the tank a...

The 3 Inch Double Flanged Fitting is a CPVC bolted outlet from Snyder Industries, built for tanks that need a serviceable 3-inch port. It mounts as a double-flange assembly - an inner and outer CPVC flange that sandwich the tank wall - drawn tight with...