Tank Fittings

The 1 Inch PVC Flange Adapter (SII-34700867) from Snyder Industries is a PVC pipe-assembly fitting, not a storage tank. It carries a 1-inch nominal size and ships as a compact piece at about 5 lb, sized for connection work on tank and plumbing assemblies...

The Norwesco N-63038 is a 2-inch double-threaded bolted fitting machined from 316 stainless steel. It ships less gasket, so you pair it with the gasket material your service and temperature call for. Overall it measures about 3 inches across the flange...

The 3/4 Inch PP Threaded Bulkhead Fitting is a Snyder Industries polypropylene through-wall connection with a 3/4 inch threaded port and an EPDM gasket. At roughly 2 lbs, it makes a clean, serviceable penetration where a pipe or hose run needs to pass...

The Snyder 1 Inch PVC Bulkhead Fitting is a socket-by-thread port fitting that creates a sealed penetration through a tank wall. It is molded from black PVC and ships with an EPDM gasket. At a nominal 1 inch, it gives a socket side for solvent-weld PVC...

This 1" full port stainless steel ball valve from Norwesco (part 60483) is a simple, dependable shutoff for 1" lines. The full port design means the valve doesn't neck down the bore the way standard port valves do, and stainless steel construction gives...

This Norwesco 3/4" bolted fitting (part 64251) is made from 316 stainless steel with a female NPT thread, and it includes an EPDM gasket. It's a bolted-style fitting, which clamps in place with bolts rather than relying on threads alone for mounting...

The 2 Inch PVC Flange Adapter from Snyder Industries is a pipe-assembly fitting, not a storage vessel. It is molded from PVC around a 2-inch adapter body, listed at roughly 14 in. tall on a 6 x 6 in. footprint and about 5 lb empty. It gives you a flanged...

This is a genuine Norwesco bolted fitting (part number 64252) in 316 stainless steel with a 1" female NPT thread and an EPDM gasket. The female NPT thread accepts standard 1" NPT male pipe and fittings.Getting the Right FitMatch the fitting size and...

The 1/2 Inch PVC Flange Adapter from Snyder Industries is a molded PVC fitting from the Flange Assemblies family, built around a 1/2 inch connection. It is hardware sized to the port it serves, so confirm your fitting size before ordering rather than...

The 1 Inch PP Threaded Bulkhead with EPDM Gasket is a Snyder Industries tank fitting, not a tank. It gives you a leak-sealed 1-inch threaded port through a poly tank wall, molded in polypropylene with an EPDM gasket. Overall it measures about 4 x 4...

The Snyder Industries 1.5 Inch PP Threaded Bulkhead is a polypropylene tank fitting with an EPDM gasket that creates a sealed 1.5-inch threaded connection through a tank wall. It gives you a defined pipe connection point rather than a bare drilled hole...

The 3/4 Inch PVC Bulkhead Fitting from Snyder Industries is a socket-by-thread port assembly that seals a controlled outlet through a tank wall. It is molded in PVC at a 3/4-inch fitting size and ships with an EPDM gasket. This is a fitting, not a tank,...