The Bushman 100 Gallon Vertical Water Storage Tank (SKU TC2364IW-BLACK) is a compact, upright polyethylene tank built for water storage, rainwater capture, and point-of-use supply where floor space is tight. At 64 inches tall on a 23 x 23 inch footprint, it holds a full 100 gallons in a footprint barely wider than two feet square, which makes it a practical fit for utility rooms, well houses, trailers, and equipment sheds where a wider tank simply will not go. This is the black, light-blocking configuration, which helps inhibit algae growth in stored water compared with a translucent tank.
Will it work for your site?
The core numbers you need are on this page and in the technical drawing: 64 inches of height, a 23 x 23 inch footprint, and a 100-gallon working capacity. Plan for weight, not just volume. Filled with water this tank carries roughly 834 pounds, so the surface under it has to carry that load fully filled, dead level, and continuously supported across the entire base. A tank this narrow and this tall is more sensitive to an out-of-level base than a squat one, so get the foundation flat before you fill. If you are still deciding between capacities or working out how much storage your draw actually requires, run the numbers through our Tank Sizing Calculator and the Tank Sizing Guide before you commit. If this tank is part of a rainwater or grey-water reuse setup, our industrial water reuse tank topology guide covers how storage fits into a quality-banded reuse train.
Freight and delivery
This tank ships LTL freight, quoted live to your ZIP code. Because a vertical storage tank of this size travels as freight rather than parcel, delivery cost depends on distance, accessorials like a liftgate or residential delivery, and your location. Get a real number in seconds with our Freight Cost Estimator, or call us at 866-418-1777 and we will quote it with you.
The mistake to avoid
The most common miss on a tall, narrow tank is treating it like it can sit on any handy surface. It cannot. Support the full base on a rigid, level pad sized for the filled 834-pound load, and never plumb a rigid line straight into a fitting without allowing for the slight flex a poly tank shows as it fills and empties. Our guides on fire-water reservoir design, concrete pad sizing, and hydrostatic test methodology walk through pad design and new-install acceptance step by step.
Ready to move? Check freight to your ZIP with the Freight Cost Estimator, or call 866-418-1777 to lock in delivery and confirm the available fittings and port sizes for your application.
