The Enduraplas THC10000KWH is a 10,400-gallon cone bottom tank riding on a steel stand, with a 15-degree cone floor engineered to drain solids and slurries toward a single bottom discharge. It measures roughly 144 inches in diameter and stands 202 inches tall overall, so it belongs in a facility with real vertical clearance and a poured pad sized for the load. If you are running full-drain batch chemistry, mixing, or settling service at this volume, the cone-and-stand geometry is what lets you empty the vessel completely instead of leaving heel product behind a flat floor.
Will it work for my application?
At capacity this tank carries roughly 86,736 pounds of water when full — that figure is the specific-gravity 1.0 baseline, so it is the number your pad, anchoring, and stand foundation have to clear before you factor in a denser fluid. Because the discharge sits at the point of a 15-degree cone, the whole working volume gravity-feeds toward the outlet, which is the behavior you want for a large 10400 gallon cone bottom chemical tank used in batching or clarifying. If you are still deciding between this footprint and a taller or wider configuration, run your numbers through the Tank Sizing Calculator and the Tank Sizing Guide before you commit the pad.
The mistake to avoid on a tank this size
The single most important step before chemical service is confirming the specific-gravity rating of this exact vessel. This unit does not have a published SG rating in our data, so do not assume 1.0. A tank rated for water can be under-spec for a heavier acid or concentrated solution, and at 10,400 gallons the consequences of overloading the wall are not small. Call us at 866-418-1777 with your chemical, concentration, and temperature, and we will verify the SG rating, resin, and what fittings and gaskets your chemistry needs against the manufacturer's chemical-resistance chart before you buy. You can cross-check your fluid in our Chemical Compatibility Database as a first pass, but the SG confirmation on this specific tank is the gate.
Cone bottom on a steel stand
This unit ships with a steel-frame stand rather than a molded polyethylene stand, which changes both the load path and the height at which your discharge plumbing lands. If you are weighing frame options for a cone bottom vessel, our guide on steel frame vs. polyethylene stand selection walks through that decision directly. For smaller companion vessels in the same system, our buyer's guides on the 300-gallon, 310-gallon, and 175-gallon cone bottom tanks cover the trade-offs — note those are 30-degree cones on poly stands, a different geometry from this 15-degree steel-stand unit. Review the technical drawing on this page for the cone angle, overall height, and stand dimensions before scheduling delivery.
This tank ships LTL freight and is quoted live to your ZIP — get a freight quote in seconds with our Freight Cost Estimator, or call 866-418-1777 to confirm SG rating, fittings, and delivery access for a vessel this size. A 10,400-gallon cone bottom on a steel stand needs the right equipment on the receiving end, so let's line up the freight and the pad details together before you order.
Freight and documents
LTL freight is quoted to your ZIP with the freight cost estimator or by phone at 866-418-1777. The listed price is before freight.
Technical drawing (PDF) for Enduraplas THC10000KWH.
See this tank
Interactive 3D model with live fill. This tank has an interactive 3D model built to its manufacturer dimensions. Rotate it, and set a fill level to see how much liquid it holds at any height. Open the 3D view on the product photo above. Download the 3D model (GLB).
Ready to order?
Add it to your cart at the top of this page, get LTL freight to your ZIP, request a written quote, or call 866-418-1777. The listed price is before freight.
