The Enduraplas TC8765IW-GREEN is a 1550-gallon vertical water storage tank built for bulk process water holding, fire-reserve, and rainwater or reuse duty where you need real volume on a stable, self-supporting footprint. It stands 65 inches tall on an 87 x 87 inch base, so it fits under low eaves and inside pole barns where taller tanks won't clear, while spreading its weight across a wide pad. The tank is green-tinted. Dimensions on this listing are verified against launch spec, and the technical drawing on this page shows the tank's profile and proportions.
Will it work for your site
This is a vertical bulk water tank rated at 1550 gallons, 65 inches tall on an 87 x 87 inch footprint. Filled to capacity with water it carries roughly 12,927 pounds, so the pad and the ground under it have to be engineered for that load - a flat, level, fully supporting concrete or compacted base, not gravel or timber cribbing. Before you pour, size the slab to the full-water weight and footprint; our concrete pad sizing guide walks through the ACI 360R-10 framework for above-ground poly tanks. If you're still deciding on volume, the Tank Sizing Calculator and Tank Sizing Guide help you match gallons to draw-down and refill rate. Fittings are not specified on this listing - confirm outlet, lid, and connection details with us at 866-418-1777 before ordering.
Common water-storage applications
At 1550 gallons this size lands well for rural and remote fire-water reservoirs, where NFPA 22 dictates how much stored volume you actually need on hand - see our fire-water reservoir design guide for the sizing discipline and cold-climate freeze protection. It's equally at home in grey-water, rainwater, and HVAC-condensate reuse trains, process water holding, and agricultural or irrigation supply.
The mistake to avoid
The most expensive error on a tank this size is skipping the hydrostatic acceptance test on the new pad. With nearly 13,000 pounds of water bearing on the base, an unmonitored first fill can find pad settlement or a fitting leak the hard way. Fill under discipline, watch for settlement, and hold to confirm the install before you put the tank into service - our hydrostatic test methodology guide covers the water-fill sequence and hold-time math.
This tank ships LTL freight and is quoted live to your ZIP - run your delivery address through the Freight Cost Estimator for a rate, or call 866-418-1777 and we'll walk it through with you.
Freight
LTL freight is quoted to your ZIP with the freight cost estimator or by phone at 866-418-1777. The listed price is before freight.
See this tank
Interactive 3D model with live fill. This tank has an interactive 3D model built to its manufacturer dimensions. Rotate it, and set a fill level to see how much liquid it holds at any height. Open the 3D view on the product photo above. Download the 3D model (GLB).
Ready to order?
Add it to your cart at the top of this page, get LTL freight to your ZIP, request a written quote, or call 866-418-1777. The listed price is before freight.
