Ronco Plastics RV29W - 17 Gallon Plastic RV Water Tank

The RV29W appears on Ronco's maker sheet as "29W L.D." - a 13-gallon fresh water molding in the light-duty potable specification. L.D. is shorthand for the material system: FDA-compliant natural polyethylene with a translucent wall, the construction Ronco reserves for drinking-water service. If a tank in this line is not marked L.D., it does not go on the fresh side; this one is, and does.

Thirteen gallons weighs about 108 lb full - water is a constant 8.34 lb per gallon - which is a manageable structural load for bench and underfloor installs alike. Because the wall is translucent, a sight check replaces a level sender in simple systems: shine a light behind the tank and read the water line.

To pin down whether the body fits your space, work from the drawing: print the drawing below, check the envelope against your bay, and mark your fitting locations for spin-weld or threaded installation at the plant. Related capacities with published footprints include the RV35W, the other 13-gallon L.D. molding, and the RV36W at 17 gallons and 23 x 21 x 9 inches. The complete fresh line is in the RV water tanks category.

Rotomolded in Tustin, California, where Ronco has operated since 1974. OneSource Plastics is an authorized Ronco Plastics dealer.

Technical drawing: download the Ronco Plastics RV29W dimensional drawing - print it to plan your install and mark exactly where you want fittings located; Ronco installs spin-weld or threaded fittings to your marked spec.