Ronco fields three different 19-gallon fresh water tanks, and the RV73W - "73W L.D. (19 GAL)" on the maker sheet - is the highest part number of the trio, from the later generation of molds. Nineteen gallons is a sweet spot for couples building out vans and small trailers: enough fresh water for several dry-camping days without the bulk of the big 20-plus-gallon bodies.
The L.D. mark is Ronco's potable specification - FDA-compliant natural polyethylene, translucent wall - and it is the line that separates fresh-water moldings from the waste series. A full tank runs about 158 lb at water's 8.34 lb per gallon, so anchor into structure.
Its two classmates publish their footprints: the RV20W runs long and low at 38 x 15.5 x 8.12 inches, and the RV27W is a narrow 32 x 12 x 12 inch chase tank, both 19 gallons. To confirm this one against your bay, use its dimensioned drawing - print the drawing below, verify the envelope, and mark your fitting locations for plant installation, spin-weld or threaded. The full potable range is in the RV water tanks category.
Rotomolded in Tustin, California, Ronco's home since 1974. OneSource Plastics is an authorized Ronco Plastics dealer.
Technical drawing: download the Ronco Plastics RV73W dimensional drawing - print it to plan your install and mark exactly where you want fittings located; Ronco installs spin-weld or threaded fittings to your marked spec.
Freight
LTL freight is quoted to your ZIP with the freight cost estimator or by phone at 866-418-1777. The listed price is before freight.
Ready to order?
Add it to your cart at the top of this page, get LTL freight to your ZIP, request a written quote, or call 866-418-1777. The listed price is before freight.
