At 19 lb of shell for 46 gallons of capacity, the RV22W is one of the most efficient moldings in Ronco's fresh water library - a tank you carry to the van under one arm, that then holds roughly 384 lb of water once plumbed and filled. The footprint is a tidy 36 x 22 inches at 14 inches tall, a block that sits naturally under a bed platform or bench.
Ronco's sheet lists it as the 22W L.D.: light-duty potable duty, natural FDA-compliant polyethylene, translucent wall for eyeball level checks. Fresh-line resin only - the gray/black side of the catalog at RV holding tanks is a different material for a different job.
Its nearest rivals are close enough to demand a tape measure: the 45-gallon RV47W at 36 x 23 x 13 inches trades an inch of height for an inch of width, while the RV33W carries the same 46 gallons flatter at 40.5 x 25.25 x 12 inches. The whole line is at RV water tanks. Whichever fits, print the drawing below and mark your fitting locations - fill, vent, outlet, sender - and Ronco spin-welds or threads them per order at its Tustin, California plant, standard practice there since 1974.
OneSource Plastics is an authorized Ronco Plastics dealer.
Technical drawing: download the Ronco Plastics RV22W dimensional drawing - print it to plan your install and mark exactly where you want fittings located; Ronco installs spin-weld or threaded fittings to your marked spec.
Freight
LTL freight is quoted to your ZIP with the freight cost estimator or by phone at 866-418-1777. The listed price is before freight.
See this tank
Interactive 3D model with live fill. This tank has an interactive 3D model built to its manufacturer dimensions. Rotate it, and set a fill level to see how much liquid it holds at any height. Open the 3D view on the product photo above. Download the 3D model (GLB).
Ready to order?
Add it to your cart at the top of this page, get LTL freight to your ZIP, request a written quote, or call 866-418-1777. The listed price is before freight.
