Twelve inches tall, 40.5 x 25.25 inches of footprint: the RV33W spreads its 46 gallons wide and flat, the shape you reach for when there is floor area to spare but the lid of the compartment sits low. Keeping roughly 384 lb of full-tank water weight (8.34 lb per gallon) down at floor level is good chassis manners anyway.
The maker sheet carries it as the 33W L.D. - light-duty potable spec in natural FDA-compliant polyethylene, the translucent fresh-line resin that shows its water level through the wall. It is a solidly built molding at 72 lb, with the broad flat panels that need that material to carry a distributed load.
The taller alternative at the same capacity is the RV22W at 36 x 22 x 14 inches; just below, the 45-gallon RV47W measures 36 x 23 x 13 inches, and above, the 48-gallon RV9W runs 48 x 20 x 12 inches. Compare across the line at RV water tanks. Fittings are installed per order at Ronco's Tustin, California plant - print the drawing below, mark your fill, vent, outlet, and sender locations, and the tank arrives with them spin-welded or threaded in place, as Ronco has done since 1974.
OneSource Plastics is an authorized Ronco Plastics dealer.
Technical drawing: download the Ronco Plastics RV33W dimensional drawing - print it to plan your install and mark exactly where you want fittings located; Ronco installs spin-weld or threaded fittings to your marked spec.
Freight
LTL freight is quoted to your ZIP with the freight cost estimator or by phone at 866-418-1777. The listed price is before freight.
See this tank
Interactive 3D model with live fill. This tank has an interactive 3D model built to its manufacturer dimensions. Rotate it, and set a fill level to see how much liquid it holds at any height. Open the 3D view on the product photo above. Download the 3D model (GLB).
Ready to order?
Add it to your cart at the top of this page, get LTL freight to your ZIP, request a written quote, or call 866-418-1777. The listed price is before freight.
