Skip to main content

Bushman

Bushman 200 Gallon Plastic Aquaponics Grow Bed Tray in Blue

$568.99
0
(No reviews yet) Write a Review
Adding to cart… The item has been added
SKU:
BM-30791
Availability:
In Stock - Ships from nearest manufacturing plant
Weight:
100.00 LBS
Width:
54.00 (in)
Height:
19.00 (in)
Depth:
61.00 (in)
Capacity:
200 Gallons
Material:
Polyethylene
Color:
Blue
Length:
61"
Lid/Manway:
8"
Freight Class:
LTL
NMFC Code:
156600-03
Manufacturer Part Number:
30791
Manufacturer:
Bushman
Ship Weight:
100 lb
Ship Dimensions:
61" L x 54" W x 19" H (crated)
Lid Size:
8"

The Bushman 200 Gallon Aquaponics Grow Bed Tray is a shallow, open-top polyethylene basin built for media beds, deep-water culture, and raft systems where you need a wide growing surface rather than a tall storage column. It measures 61 inches long by 54 inches wide by 19 inches tall, giving you a broad 54.0 x 61.0 inch footprint and roughly 200 gallons of working volume in a molded blue tray. Empty weight is about 100 pounds, so one or two people can position it before plumbing.

Will it work for your grow bed?

This is a grow-bed tray, not a pressurized tank. The wide, low profile is what makes a 200 gallon tray useful for aquaponics: shallow depth keeps roots, media, and water within easy reach, and the flat bottom sits stable on a bench or stand. It ships with an 8-inch lid opening and nothing else pre-installed - no bulkheads, drains, or outlets are molded in, so every flood and drain connection, along with the bulkhead fittings and gaskets they need, is field-added by the installer. Plan that plumbing around the tray geometry shown on the technical drawing on this page. The tray is rated for continuous water contact only; it is an open-top basin, not a pressure or chemical vessel. If you are staging multiple beds or matching this Bushman tray to a sump and fish tank, the Tank Sizing Calculator and Tank Sizing Guide help you balance volume across the loop.

Weight and siting

Water is the load that matters here. Filled to capacity, this 200 gallon tray holds about 1,668 pounds of water alone, spread across the 54 x 61 inch footprint. Grow media - expanded clay, gravel, or similar - adds substantial dead load on top of that water figure, so size the stand well above the water-only number rather than to it. Build or select a stand rated for the full flooded load plus media, and confirm the surface underneath is level so the shallow basin drains and floods evenly instead of pooling to one side. For a permanent above-ground bench on a slab, review our guide on concrete pad sizing for above-ground polyethylene tanks.

Freight to your ZIP

This Bushman aquaponics tray ships LTL from Bushman's Oklahoma point, though the Texas plant may serve some lanes - the estimator picks the actual origin for your ZIP. Because it is a wide, lightweight molded tray, it moves as freight rather than parcel, and the cost depends on your delivery ZIP and dock or driveway access. Get a live number with our Freight Cost Estimator, or call 866-418-1777 and we will quote it for you. If rainwater feed is part of your aquaponics plan, our write-up on Bushman rainwater harvesting and first-flush diverter sizing pairs well with this build.

Freight and documents

Ships from: Fairfield, TX. LTL freight is quoted to your ZIP with the freight cost estimator or by phone at 866-418-1777. The listed price is before freight.

See this tank

Product video. Watch the Bushman 200 Gallon Plastic Aquaponics Grow Bed Tray in Blue video (64 seconds) with dimensions, fittings and shipping notes.

Ready to order?

Add it to your cart at the top of this page, get LTL freight to your ZIP, request a written quote, or call 866-418-1777. The listed price is before freight.

Adding to cart… The item has been added