Skip to main content

Enduraplas

Enduraplas 100 Gallon Beige Vertical Water Storage Tank

$449.00
0
(No reviews yet) Write a Review
Adding to cart… The item has been added
SKU:
TLV00100BE
Availability:
In Stock - Ships from nearest manufacturing plant
Weight:
38.00 LBS
Width:
30.00 (in)
Height:
43.00 (in)
Depth:
30.00 (in)
Capacity:
100 Gallons
Material:
Polyethylene
Color:
Beige
Diameter:
30"
Outlet:
2" PP Female NPT Bulkhead Fitting
Lid/Manway:
8"
Specific Gravity:
1.1
Max Temperature:
120° F / 48° C
Certifications:
FDA Approved
Warranty:
10 Year Warranty withActivation
Freight Class:
300
Manufacturer Part Number:
TLV00100BE
Manufacturer:
Enduraplas

The Enduraplas 100 Gallon Beige Vertical Water Storage Tank (SKU TLV00100BE) is a compact polyethylene vertical storage tank built for general water service where floor space is tight. At 43 inches tall on a 30 by 30 inch footprint, it holds 100 gallons in a footprint small enough to fit a utility closet, pump-house corner, or the bed of a work truck, making it a practical choice for anyone searching for a 100 gallon beige water tank or a vertical water storage tank that does not sprawl across a room.

Will it work for your site?

This is a vertical water tank molded from polyethylene with a 1.1 specific gravity rating, meaning it is engineered for water and water-like fluids up to that density. Filled with plain water, the tank and contents weigh about 834 pounds, and the tank is rated to carry up to 917 pounds of contents total, roughly 10 percent of headroom above a full water load that is consistent with the 1.1 SG rating. Use those figures when you plan the surface underneath it: a level, continuously supported pad rated for the full load is what keeps a poly tank from stressing at the base. Our Tank Sizing Calculator and Tank Sizing Guide help you confirm 100 gallons matches your draw and refill cycle before you buy.

Setting it up right

The most common mistake with a vertical storage tank this size is skipping the pad. Even at 100 gallons, a water-full tank concentrates hundreds of pounds on a 30 by 30 inch base, so it needs uniform support rather than a few high spots or bare soil. If you are pouring concrete underneath it, our guide on concrete pad sizing for above-ground polyethylene tanks walks through the framework. Before you put the tank into service, a water-fill acceptance check catches pad settlement and fitting leaks early; see our hydrostatic test methodology for the hold-time and monitoring discipline.

Where a compact buffer fits

A tank this small often serves as a point-of-use buffer rather than primary bulk storage. If you are staging water for a private fire-protection setup, our guide on fire-water reservoir tank design for rural and remote sites covers NFPA 22 sizing discipline and cold-climate freeze protection. For grey-water, rainwater, or condensate reuse, the industrial water-reuse tank topology guide shows how a compact vertical fits into a quality-banded storage train.

Freight and ordering

This tank ships LTL freight from the Enduraplas plant in Converse, TX, and freight is quoted live to your ZIP code rather than bundled into the list price. Buyers outside Texas should plan for LTL transit time and get a firm number before ordering. Pull an exact quote with our Freight Cost Estimator, or call 866-418-1777 and we will quote it and answer any sizing or setup questions before you order.

Adding to cart… The item has been added