The Enduraplas 1650 Gallon Beige Vertical Water Storage Tank is a polyethylene bulk-water vessel built for above-ground water storage including potable supply, irrigation, fire reserve, and captured rainwater or reuse streams. It carries a 1.1 specific-gravity rating, which means the resin and wall section are engineered to safely hold contents slightly denser than plain water. The beige exterior cuts light penetration to slow algae growth in standing water, and the upright vertical form keeps the storage footprint compact while maximizing usable capacity per square foot of pad. Confirm the exact height and diameter against the technical drawing on this page before you finalize a foundation layout.
Will this water storage tank work for your site?
Sizing this tank correctly starts with weight, not just gallons. Filled to capacity with plain water, the tank and contents reach roughly 13,761 pounds; at the full 1.1 specific-gravity rating it is engineered to carry up to 15,137 pounds of contents. That load lands on the tank's footprint, so the pad underneath has to be level, continuously supported, and rated for the static weight when full. Use the Tank Sizing Calculator and the Tank Sizing Guide to confirm the 1,650-gallon working volume matches your draw and refill cycle before you commit. For setting it on a new base, the Concrete Pad Sizing for Above-Ground Polyethylene Tanks guide walks through the ACI 360R-10 framework so the slab actually carries the loaded tank.
How it ships and what it weighs
This vertical storage tank ships LTL from Converse, TX, with freight quoted live to your ZIP. Because the empty tank is large and light, LTL carriers price it by the dimensional space it occupies rather than scale weight, so the destination and access conditions drive the cost more than the gallon count. Pull a number before you order with the Freight Cost Estimator, or call 866-418-1777 and we will quote it for you. Plan the offload too: a tank this size needs a forklift or several hands and clear access at the delivery point.
The mistake to avoid
The single biggest error on a tank like this is treating the 1.1 specific-gravity rating as a license to store any liquid. That rating governs density, not chemical compatibility. This is a water storage tank, and it should be specified for water service such as potable supply, irrigation, fire reserve, or captured rainwater and reuse streams. If you are planning a private fire-protection reservoir, the Fire-Water Reservoir Tank Design guide covers NFPA 22 sizing and cold-climate freeze protection; for grey-water, rainwater, and HVAC condensate aggregation, see the Industrial Water Reuse Tank Topology guide. After install, the Hydrostatic Test Methodology guide covers the water-fill acceptance test that confirms the fittings seal and the pad does not settle. Check outlet and fitting size and placement against the technical drawing on this page before you plumb anything or order a mating bulkhead fitting and gasket.
Ready to move? Get your freight number with the Freight Cost Estimator or call 866-418-1777. We ship this Enduraplas vertical water storage tank LTL from Converse, TX, with freight quoted live to your ZIP.
