The Enduraplas 200 Gallon White Vertical Storage Tank gives you 200 gallons of upright liquid storage on a compact 30-inch by 30-inch footprint, standing 79 inches tall. It is molded from polyethylene in natural white, so you can read the liquid level through the wall in daylight, and it carries a 1.9 specific gravity rating, which means the tank body itself is built to hold contents considerably heavier than water without stepping up to a different model. For a homeowner, farm, or jobsite that needs a tall, small-floor-area vertical storage tank for water, this is a straightforward, durable choice.
Will it work for your site?
Plan your pad and plumbing around the real numbers. Filled with water, this 200 gallon vertical tank carries roughly 1,668 pounds, and at its full 1.9 specific gravity rating it can hold up to about 3,169 pounds of contents. That weight sits on a 30.0 x 30.0 inch footprint, so the ground under it has to be flat, fully supported, and rated for that load - a tall, narrow vertical tank concentrates a lot of weight on a small area. The 79-inch height also means you should confirm overhead clearance and a stable base before delivery. If you are still deciding whether 200 gallons is the right capacity for your draw and refill cycle, run the numbers with our Tank Sizing Calculator and read the Tank Sizing Guide before you commit.
The mistake to avoid
The most common error with a high-SG tank like this is treating the 1.9 rating as a promise that any liquid is fine. The 1.9 specific gravity tells you the structural ceiling for contents density - it is not a chemical-compatibility clearance. The upside is real: because the body is rated to 1.9, the same tank handles heavier-than-water contents up to the roughly 3,169-pound rated contents weight without forcing you into a separate higher-SG model. This listing is for water and general liquid storage; do not assume it is approved for potable, food-grade, or chemical service without confirming the resin and the appropriate resistance data for your specific liquid. Match the fittings and the gaskets or seals - not just the poly wall - to the actual contents, since gasket material is usually the first failure point in chemical service, and keep the contents within the rated density.
Vertical tank height and clearance
Because this is a vertical storage tank rather than a low-profile or horizontal style, the 79-inch height does the work that a wider tank would otherwise need floor space for. That makes it a good fit where you have headroom but limited ground area - a corner of a barn, a utility room, or a tight equipment pad. Outlet and fitting configuration is not detailed in this listing, so call us at 866-418-1777 to confirm the outlet, overflow, and any fitting locations before you order, so your discharge line lands where you need it. If this tank will serve a rural water reserve or fire-protection role, our guide on fire-water reservoir tank design walks through reserve sizing and cold-climate freeze protection. For a deeper spec-by-spec walkthrough, see the 200 gallon vertical liquid storage tank buyer's guide.
This 200 gallon vertical storage tank ships LTL freight from the Enduraplas plant in Converse, TX, and freight is quoted live to your ZIP code. Get your exact cost with the Freight Cost Estimator, or call us at 866-418-1777 and we will price the run from Converse, TX and confirm the contents you plan to store.
