The Enduraplas 210 Gallon White Vertical Storage Tank is a 210-gallon polyethylene tank that gives you bulk water storage in a compact 40 x 40 inch footprint, standing 48 inches tall. The natural white wall lets you read the liquid level at a glance, and the vertical profile keeps the tank stable while taking up minimal floor space on a pad or in a utility room. This is the white vertical storage tank to spec when you need real storage volume without the sprawl of a horizontal or low-profile unit.
Will this Enduraplas vertical tank work for your job?
The tank holds 210 gallons inside a 48-inch-tall body on a 40 x 40 inch base. Filled with water, the tank and its contents weigh about 1,751 pounds, so the pad, deck, or slab underneath has to carry that load and stay level - a tank that settles unevenly puts stress on the wall over time. The polyethylene wall carries a specific gravity rating of 1.9, which means this same tank body is rated to hold liquids up to 1.9 times the weight of water - most water tanks are rated 1.0 to 1.5 - up to a maximum rated contents weight of 3,328 pounds. For plain water you are well inside that envelope. If you are still deciding between sizes, run the numbers through our Tank Sizing Calculator and the Tank Sizing Guide before you commit. For exact fitting and dimension callouts, see the technical drawing on this page.
How it ships
This vertical storage tank ships LTL freight from the Enduraplas plant in Converse, Texas, with the cost quoted live to your ZIP code. Because freight is rated by destination, distance, and access, the number is specific to your delivery address - get it instantly with our Freight Cost Estimator or call 866-418-1777 and we will rate it for you. The 40 x 40 inch footprint and 48-inch height keep this tank inside standard LTL handling, but confirm you have a way to offload at delivery, since a curbside drop is the standard service level.
The mistake to avoid
The most common error on a tank this size is treating the foundation as an afterthought. At roughly 1,751 pounds full, this tank needs a flat, fully supported, level base - not a few patio blocks or bare soil that can wash out. A vertical tank concentrates its weight on a small footprint, so point loads matter. If you are pouring a slab, our guide on concrete pad sizing for above-ground polyethylene tanks walks through the ACI framework so the pad matches the load. The other thing to check before you buy: that 1.9 specific gravity rating tells you the tank body can handle dense liquids, but this listing is set up for water service. If your storage may shift to fertilizer, brine, or another heavy solution, confirm the inlet, outlet, and vent fitting sizes, fitting materials, and gasket compatibility against the technical drawing before ordering - and confirm the right tank for that service first.
Common applications for this unit include rural water storage and reuse. If you are building a fire-water reserve, capturing rainwater, or running a grey-water and rainwater aggregation train, see our guides on fire-water reservoir tank design, rainwater harvesting and first-flush diverter sizing, and industrial water reuse tank topology. Ready to move? Get your freight quote with the Freight Cost Estimator or call 866-418-1777 to lock in delivery from Converse, Texas to your ZIP.
