The Enduraplas 200 Gallon Black Vertical Storage Tank (SKU THV00200B) holds 200 gallons of liquid in a compact 30-inch by 30-inch footprint and stands 79 inches tall. That tall, narrow profile fits sites where floor space is tight but headroom is available, which makes it a practical choice for bulk water storage, fire-water reserve, rainwater collection, and industrial water reuse where a wide squat tank will not fit.
Will it work for your application?
This is a vertical storage tank molded in black polyethylene with a 1.9 specific gravity rating. That rating means the wall is engineered to carry liquids nearly twice the weight of water, so plain water at SG 1.0 sits well within the structure's capability, with real headroom for a heavier liquid should the use change down the road (confirm fitting and material limits first). Full of water, expect roughly 1,668 pounds of liquid weight; the maximum rated contents weight is 3,169 pounds. For help confirming the right capacity for your draw rate and refill cycle, run the Tank Sizing Calculator or read the Tank Sizing Guide.
Fittings and placement
Fitting size and location are not specified in this listing, so confirm the outlet, fill, and vent provisions against the technical drawing on this page, or call 866-418-1777, before you order plumbing, bulkheads, or gaskets. On placement, this tank arrives empty and light enough to position by forklift, but once it is filled it cannot be moved, so decide the final location before filling. Set it on a full-contact, level concrete pad sized to the 30-inch by 30-inch footprint. Because the tank stands 79 inches tall on that narrow base, it is genuinely top-prone when empty or partly full in wind, so strap or anchor it to the pad, especially outdoors. Our guide on concrete pad sizing for above-ground polyethylene tanks walks through the framework.
The mistake to avoid
The common error on a tall vertical tank is setting it on an undersized or unlevel base. At 79 inches of height carrying up to 3,169 pounds of contents, this tank concentrates real load on its 30-inch by 30-inch footprint, and an uneven pad puts uneven stress on the tank wall. If this tank is going into a fire-water reserve, the fire-water reservoir design guide covers NFPA 22 sizing and cold-climate freeze protection. For rainwater collection, the first-flush diverter sizing guide helps keep the captured water clean, and for grey-water or HVAC condensate aggregation, see our industrial water reuse tank topology guide.
Listed before freight, this 200 gallon vertical storage tank ships LTL from the Enduraplas plant in Converse, Texas, quoted live to your ZIP rather than baked into the listed price. Plan for a liftgate or forklift at delivery if you do not have a dock, get your freight number from the Freight Cost Estimator, and call 866-418-1777 with any questions on sizing, fittings, or delivery.
