The Enduraplas 2000 Gallon White Vertical Storage Tank (SKU THV02000W) is a molded polyethylene vertical tank built for bulk water and general liquid storage where you need serious volume in a compact footprint. It stands 93 inches tall on a 90 x 90 inch base, holds 2,000 gallons, and comes in a natural white polyethylene wall. If you have been searching for a 2000 gallon vertical storage tank, this is the Enduraplas build in that size.
Will it work for your site?
Start with the numbers that matter for a full tank. Water at 2,000 gallons weighs about 16,680 pounds, so the pad, ring, or slab under this tank has to carry more than eight tons plus the tank itself. The tank is rated to a specific gravity of 1.9, meaning the wall is engineered to hold contents up to 1.9 times the weight of water, for a maximum rated contents weight of about 31,692 pounds on heavier liquids. For plain water you are well within that envelope, but the SG 1.9 rating is what lets this tank cover a wide range of general-purpose liquids by weight without stressing the wall. Two dimensions drive your fit check: the 90 x 90 inch footprint has to sit fully supported, and at 93 inches tall you need to confirm doorway, roll-up, and overhead clearance at the install spot before delivery day. Use the Tank Sizing Calculator and the Tank Sizing Guide to confirm this capacity matches your draw-down and refill cycle.
Freight: how it ships
This tank ships LTL freight on a pallet, quoted live to your ZIP code. Enduraplas runs two origins for this size, Converse, TX and Neche, ND, and your order pulls from whichever of the two is nearest to you, which usually keeps the freight lane short. Freight is quoted live rather than fixed, so get an exact number with the Freight Cost Estimator or call us at 866-418-1777 and we will quote the closest origin to your ZIP.
The mistake to avoid
The most common error on a tank this size is skipping the base work. A 2,000 gallon tank that weighs over 16,000 pounds full will find every soft spot, void, or slope under it, and an uneven base can distort the tank floor over time. Prepare a flat pad that fully supports the entire 90 x 90 inch footprint before delivery, not after. Also match your intended liquid to polyethylene service before ordering: this is a natural white polyethylene vertical tank, and while the SG 1.9 rating covers heavier contents by weight, the resin still has to suit the liquid. For rural fire-water and reservoir applications, our guide on fire-water reservoir tank design covers NFPA 22 sizing discipline and cold-climate freeze protection for polyethylene tanks.
See the technical drawing on this page for fitting locations and full dimensional detail, and read our 2000 gallon vertical tank buyer's guide for a deeper look at this size. Ready to move? Estimate freight with the Freight Cost Estimator or call 866-418-1777 for a quote from the nearest plant to your ZIP.
