The Enduraplas 3000 Gallon Vertical Water Storage Tank in black is a polyethylene vertical storage tank built for bulk water on farms, ranches, rural homesteads, and industrial sites. Filled to capacity with 3,000 gallons, this tank carries roughly 25,020 pounds, so the pad it sits on matters as much as the tank itself. Below is what it does, how it ships, and the one thing most buyers get wrong before the truck arrives.
Will this tank do the job
This is a 3,000 gallon vertical water storage tank molded from polyethylene in black. Black resin blocks light, which suppresses the algae growth that plagues translucent and lighter tanks holding water in open sun, so it is a sound choice for outdoor water storage, irrigation reserve, livestock supply, and water hauling. The full-water weight of 25,020 pounds is the number that drives your site prep: this tank needs a level, continuously supported, engineered pad - typically a reinforced concrete slab or a compacted, ring-confined base rated to carry the full load without settling. Spread across a roughly 98 to 102 inch diameter footprint, that weight works out to about 330 to 360 pounds per square foot of uniform bearing - hand that figure to your concrete contractor and check it against your soil's bearing capacity before you pour. A vertical storage tank that sits on uneven or undersized footing will rock, stress the outlet, and eventually crack. Size your reserve against demand with the Tank Sizing Calculator and the Tank Sizing Guide before you commit to a single tank versus a multi-tank train.
Confirm the configuration and fittings before you pour
This black 3,000 gallon model ships in more than one footprint - our buyer's guides cover both the 98 x 101 configuration and the 102 x 93 configuration. Because a 98 inch versus 102 inch base changes both your slab size and the bearing math above, confirm which configuration ships to you before you set your pad. Do the same with the plumbing: inlet, outlet, and fitting locations and sizes are not assumed here - do not plan around a bottom outlet or a particular thread until you have confirmed the exact ports against the technical drawing on this page. Get the outside dimensions and fitting layout right on paper, and the install goes in clean.
Where it fits in your water system
At 3,000 gallons this tank is a workhorse for projects that need real reserve without going to steel or fiberglass. It anchors private fire-protection storage on remote properties - see our guide on fire-water reservoir tank design for rural and remote sites for NFPA 22 sizing discipline and cold-climate freeze protection. It also serves as a storage stage in industrial water reuse trains aggregating grey-water, rainwater, and HVAC condensate.
Freight and ordering
This Enduraplas tank ships LTL freight from the Converse, Texas plant, and freight is quoted live to your ZIP - we never bury it in the list price. Because this tank stands roughly 98 to 102 inches tall and just as wide, it generally exceeds standard liftgate width and capacity, so confirm forklift availability or an unloading plan at the delivery site before the truck rolls. Get your freight quote in seconds with the Freight Cost Estimator, or call us at 866-418-1777 and we will price the freight, confirm the unloading requirements for a tank this size, and answer any spec question. A tank holding 25,020 pounds of water is a long-term piece of your water infrastructure - order the right one once, and let us handle the logistics of getting it to you.
