Enduraplas 3200 Gallon Green Vertical Storage Tank

The Enduraplas 3200 Gallon Green Vertical Storage Tank (SKU THV03200G) is a molded polyethylene vertical storage tank built for bulk water and heavier-liquid storage where you need real volume in a stable, stationary footprint. It sits on a 110 x 110 inch footprint at 103 inches tall, and because the width and height are close, confirm both the base dimensions and overhead clearance against the technical drawing on this page before you pour a pad or plan a roof line. It is molded in green, and the 1.9 specific gravity rating gives you meaningful density headroom above plain water.

Will this vertical storage tank work for your site?

This is a 3,200-gallon vertical tank, and the numbers that drive your foundation and rigging are fixed. Filled with water it carries roughly 26,688 pounds of contents; at maximum rated fill the shell is engineered to hold up to 50,707 pounds thanks to that 1.9 specific gravity rating. That SG rating is the real differentiator here: this tank stores denser, heavier-than-water liquids up to 1.9 specific gravity, where a standard 1.0 to 1.5 SG tank would be over-stressed. If your service is water, you simply have extra structural margin. Use our Tank Sizing Calculator and Tank Sizing Guide to confirm this size fits your draw and refill cycle.

Fittings, foundation, and use

Outlet and fitting locations are shown on the technical drawing on this page; review them before you plumb, and select gaskets to suit your stored liquid (fittings and gaskets are specified per the drawing, not assumed included). As a full-height vertical storage tank it suits rural water supply, fire-water reservoir duty, irrigation, and industrial water reuse. See the fire-water reservoir design guide for NFPA 22 sizing and freeze protection, the concrete pad sizing guide for supporting a tank this heavy, and the water reuse topology guide for grey-water and rainwater aggregation.

The mistake to avoid

The most common error at this size is undersizing the foundation. Size the pad for the maximum loaded weight, not the empty shell, and keep the base fully and evenly supported so the polyethylene is never point-loaded. Confirm your fill liquid's specific gravity stays at or below the 1.9 rating, and verify fitting placement against the drawing before committing your plumbing runs.

This Enduraplas vertical storage tank ships LTL freight from a single manufacturing plant in Neche, North Dakota, quoted live to your ZIP code, so delivery cost is distance-driven with no closer stocking point. Get a rate with our Freight Cost Estimator, or call 866-418-1777 to confirm site access for a tank of this size.