The Enduraplas 3200 Gallon White Vertical Storage Tank (SKU THV03200W) is a molded polyethylene vertical storage tank built for high-volume water duty on farms, rural fire-water reservoirs, construction sites, and industrial water-reuse trains. It holds 3,200 gallons in a natural white body measuring 110 inches in overall diameter and 103 inches in overall height, so before you order, confirm your pad, gate and access-road width, and any overhead clearance can take a tank of this diameter and height.
Will it work for your site?
This is a straight vertical storage tank for water and water-based liquids. Filled with plain water, it weighs roughly 26,688 pounds, and it carries a specific-gravity rating of 1.9, giving a maximum rated contents weight near 50,707 pounds. That SG headroom means the wall is rated for liquids denser than water, but the deciding factor for any specific fluid is always chemical compatibility of the resin and gaskets, not weight alone. Size it against your real draw and refill cycle with our Tank Sizing Calculator and the Tank Sizing Guide. If this feeds a private fire-protection system, our fire-water reservoir design guide walks through NFPA 22 sizing and cold-climate freeze protection.
Foundation and setup
A tank in this weight class needs a level, continuously supported base. Design the pad and any anchoring to the maximum rated 50,707 pounds if you will ever store a denser-than-water fluid, not the 26,688-pound water figure, because under-designing to the water weight is the trap once the 1.9 SG headroom gets used. With that load bearing on a 110-inch circle, the base has to carry full contents weight without deflection or point loading. Our concrete pad sizing guide covers the ACI 360R-10 framework for above-ground polyethylene tanks. Confirm the overall dimensions above and review the technical drawing on this page before you finalize plumbing and pad layout.
The mistake to avoid
The common error on a white vertical storage tank this size is treating the 1.9 SG rating as blanket approval for any liquid. It is a structural rating for denser water-based contents, not a compatibility clearance. Keep this tank on water and water-based service unless you have verified resin and gasket compatibility for anything else. Note that this listing does not specify factory fittings, so confirm outlet and bulkhead size, lid size, and gasket material by phone before ordering. If you are aggregating grey-water, rainwater, or HVAC condensate, our water reuse topology guide covers quality-banded storage trains.
This tank ships LTL freight from the Enduraplas plant in Neche, North Dakota, with cost quoted live to your ZIP. Because it moves on a single point of origin, transit distance drives the freight, so quote early with the Freight Cost Estimator, or call 866-418-1777 to confirm fittings, lead time, and freight before you order.
