The Enduraplas 75 Gallon Narrow Fuel Boss is a portable polyethylene diesel transfer tank built to move fuel to equipment, generators, and remote job sites without dragging a truck to every machine. It ships as a complete transfer package with an integrated pump and fuel nozzle, so you fill and dispense from one self-contained unit. At 51 inches long, 21 inches wide, and 31 inches tall, its narrow footprint is engineered to drop into a truck bed, trailer, or utility rail where a wider tank simply will not fit.
Will it work for your setup?
Capacity is 75 gallons in a molded polyethylene body. The 21.0 x 51.0 inch footprint is the number to check first: measure your bed rails or trailer deck before you order, because "narrow" here means it slots between wheel wells and along a side rail rather than taking the full deck width. As a hydrostatic reference, filled with 75 gallons of water this tank carries about 626 pounds — use that figure to plan your mounting, tie-downs, and deck rating, and rate everything around a fully loaded tank rather than an empty one. If you are matching capacity to a duty cycle, run your daily burn and refill interval through our Tank Sizing Calculator and the Tank Sizing Guide so you are not undersized on a long shift.
Pump and nozzle included
This is a Fuel Boss configuration, which means the pump and fuel nozzle are part of the package rather than an add-on you source separately. That matters for portable diesel and fuel-transfer work where you need to dispense on the spot instead of hauling equipment back to a fixed pump. Keep the unit secured and level while transferring, and confirm your local rules for portable fuel transport and storage before putting it into rotation.
Freight and how to order
This tank ships by LTL freight, quoted live to your ZIP from the nearest stocking plant — Converse, TX or Neche, ND. Freight on a unit this size depends heavily on distance and your delivery point, so get an exact number before you commit: run your ZIP through our Freight Cost Estimator, or call us at 866-418-1777 and we will pull a live quote from the closest plant to you. If you are setting up a fixed fill point or loadout area for the tank, our loadout pad engineering guide covers spill containment and pad geometry worth reading before you build.
