Second opinions matter when you are fitting a tank to a bay, and the RV32W is Ronco Plastics' second opinion at 55 gallons: same capacity as its sibling molds, its own geometry, a 74 lb light-duty shell. Coach builders keep multiple 55-gallon shapes in the line precisely because the tank has to fit the frame, not the other way around.
Fresh-water spec throughout: FDA-compliant natural polyethylene, translucent wall for visual level checks, one-piece rotomolded construction with no seams. Fill it and you are carrying roughly 459 lb, so the mounting plan matters as much as the tank.
The footprint is on the drawing below - print the drawing below, offer it up to your space, and mark your fitting locations for the factory. Ronco has installed fittings to order, spin-weld or threaded, at its Tustin, California plant since 1974, and the click-to-place planner on this page makes the marking easy. Cross-shop the 55-gallon RV28W and the 55-gallon RV48W at 40 x 24 x 14 inches before deciding; the whole shelf is under RV water tanks in the Ronco Plastics line.
OneSource Plastics is an authorized Ronco Plastics dealer.
Technical drawing: download the Ronco Plastics RV32W dimensional drawing - print it to plan your install and mark exactly where you want fittings located; Ronco installs spin-weld or threaded fittings to your marked spec.
Freight
LTL freight is quoted to your ZIP with the freight cost estimator or by phone at 866-418-1777. The listed price is before freight.
Ready to order?
Add it to your cart at the top of this page, get LTL freight to your ZIP, request a written quote, or call 866-418-1777. The listed price is before freight.
