Ronco Plastics RV40W - 65 Gallon Light Duty RV Fresh Water Tank

Sixty-five gallons is boondocking range. With sensible use - navy showers, careful dishwashing - the RV40W's capacity keeps a couple off the hookups for days at a stretch, which is exactly the buyer this tank finds: dry campers, desert rats, and anyone whose favorite sites have no spigot. It is a light-duty fresh water molding at 80 lb, FDA-compliant natural polyethylene with Ronco's translucent wall.

Full, 65 gallons is about 542 lb of water. That number belongs in your payload math before the tank goes in, and it is why the mounting cradle deserves as much thought as the tank itself. The one-piece rotomolded shell - no seams, no welds - is built for exactly this kind of loaded, moving service.

The shape is recorded on the drawing below: print the drawing below, confirm clearances, and mark your fitting locations, because every tank gets its spin-weld or threaded fittings installed to order at the Tustin, California plant Ronco has run since 1974. Nearby capacities: the 65-gallon RV55W in another shape and the 64-gallon RV62W just below. The full run is under RV water tanks, with shipping priced by the freight cost estimator.

OneSource Plastics is an authorized Ronco Plastics dealer.

Technical drawing: download the Ronco Plastics RV40W dimensional drawing - print it to plan your install and mark exactly where you want fittings located; Ronco installs spin-weld or threaded fittings to your marked spec.