13.5 inches of height is the RV65W's whole personality. It is the lowest-profile tank in Ronco Plastics' large fresh-water bracket - 76 gallons laid out across 51 x 27 inches - built for coaches where underfloor clearance is measured in finger-widths and every taller tank has already been ruled out. The shell is a 79 lb light-duty molding.
Capacity does not care about profile: full, this tank holds about 634 lb of water, spread long and wide so the chassis carries it as a distributed load rather than a point mass. The FDA-compliant natural polyethylene is translucent - kneel down, glance at the wall, and you know your remaining range.
One gallon below it, the 75-gallon RV61W at 54 x 22 x 16 inches runs narrower and taller; well above, the 90-gallon RV64W at 39.25 x 39.25 x 14.5 inches keeps the slab idea going. Like every Ronco tank rotomolded in Tustin, California since 1974, the RV65W ships with fittings installed to your order - spin-weld or threaded - so print the drawing below and mark your fitting locations. The rest: RV water tanks.
OneSource Plastics is an authorized Ronco Plastics dealer.
Technical drawing: download the Ronco Plastics RV65W dimensional drawing - print it to plan your install and mark exactly where you want fittings located; Ronco installs spin-weld or threaded fittings to your marked spec.
Specifications
| Dimensions | 27 x 51 x 13.5 in (W x D x H) |
|---|---|
| Capacity | 76 Gallons |
| Material | Low Density Linear Polyethylene |
| Certifications | FDA Approved |
| Ship Weight | 79 lb |
| Ship Dimensions | 51" L x 27" W x 13" H (crated) |
Freight
LTL freight is quoted to your ZIP with the freight cost estimator or by phone at 866-418-1777. The listed price is before freight.
Ready to order?
Add it to your cart at the top of this page, get LTL freight to your ZIP, request a written quote, or call 866-418-1777. The listed price is before freight.
