Snyder's steel stand for its 17 gallon cone bottom tank
Part number 48400 is the Snyder Industries steel stand for its 17 gallon cone bottom tanks. A cone bottom tank cannot stand on its own, so the stand cradles the cone and holds the outlet high enough to get a valve, a bucket or a pump inlet under it. This one is a compact steel frame 18.25 inches long, 19 inches wide and 30.13 inches tall, weighing 22 lb, small enough to ship by UPS and to sit on a bench or in a corner of a shop. The tank size is the thing to match: Snyder pairs each cone bottom tank with its own stand, and this is the one for the 17 gallon tank.
Ordering it with the tank? Call 866-418-1777 with the tank part number and we confirm the pairing, or get shipping to your ZIP and add it to your cart above.
What to check before you buy
- The tank. Snyder's 17 gallon cone bottom tank. Our cone bottom tank and stand compatibility matrix lists which stand goes with which tank across the brands we carry.
- Steel or polyethylene. This is the steel frame. If the tank sits where it will be hosed down or holds something that attacks steel, read our steel frame versus polyethylene stand decision tree first.
- The surface. A flat, level 19 by 18.25 inch area. On a bench, check that the bench carries the full tank; 17 gallons of liquid weighs more than the bench was probably built for.
- The height. The frame is 30.13 inches tall, which sets what fits under the cone outlet: a valve and a hose, a carboy, a bucket or a small pump. Measure that before you order.
- Anchoring. No anchor hardware is listed. A small tank on a stand is easy to knock; put it where it will not be walked into, or fasten it down.
Snyder's drawing for the stand is linked on this page under Technical Drawing.
Setting it up
Set the stand where it will live and level it across both diagonals. Set the empty tank in it, turn the tank so the outlet points where the hose will run, and fit the valve before the first fill. Fill with water the first time so any problem shows up with something harmless in the tank. Support the hose leaving the valve so the cone outlet carries liquid, not hardware.
Shipping
The stand ships by UPS, 19 by 19 by 31 inches and 22 lb, under NMFC 178690, from Snyder's Lincoln, Nebraska plant. The listed price is before freight; the freight cost estimator gives the cost to your ZIP. If you are ordering the tank at the same time, put both on one order and tell us so they arrive together. When it arrives, check the part number 48400 on the label and look at the four feet before a tank goes in it.
Freight and documents
LTL freight is quoted to your ZIP with the freight cost estimator or by phone at 866-418-1777. The listed price is before freight.
Technical drawing (PDF) for Snyder Industries 48400.
See this tank
Product video. Watch the Snyder Industries Stand for 17 Gallon Cone Bottom Tanks video (61 seconds) with dimensions, fittings and shipping notes.
Ready to order?
Add it to your cart at the top of this page, get LTL freight to your ZIP, request a written quote, or call 866-418-1777. The listed price is before freight.
