Snyder Industries Tanks in Merced, CA

The 12 Inch Riser from Snyder Industries is a polyethylene access-opening extension collar measuring 12 inches high with a 20 x 20 inch footprint (20 inches in diameter). It raises the height of a...

This is a Snyder Industries metal tank band: a stainless steel hoop that supports a 730-gallon Snyder tank. It is not a storage vessel on its own but a support ring that wraps the tank shell to hold...

The Snyder Industries 30 Gallon Black Heavy Duty Cone Bottom Mixing Tank is built for batch chemical work where you need the tank to fully drain and dose without leaving a heel in the bottom. It...

The 1.5 Inch Stainless Steel Double-Flanged Bolted Fitting from Snyder Industries adds a sealed 1.5-inch port to your tank wall. Both flanges are stainless steel, and the connection is sealed with an...

The 2 Inch PVC Siphon Tube with EPDM Gasket is a Schedule 40 PVC fitting from Snyder Industries, built to draw water down to the low point of a polyethylene storage tank so you can pull usable volume...

The 3 Inch Siphon Tube from Snyder Industries is a CPVC draw component that pulls liquid from a bulk storage tank through a top fitting, so you can evacuate contents from above rather than cutting a...

The Snyder Industries 30 Gallon Heavy Duty Cone Bottom Mixing Tank is built for chemical service where the contents need to drain completely and stay mixed. It holds 30 gallons in a compact 27-inch...

A 1 inch bolted fitting for chemistry that eats gaskets The Snyder 34701109 is a 1 inch double flanged polypropylene bolted fitting with stainless steel bolts and a Viton gasket. It is the fitting...

The Snyder Industries 60 Gallon Black Heavy Duty Cone Bottom Mixing Tank (SKU 32419B) is a high density linear polyethylene cone tank rated to 1.9 specific gravity, built for aggressive chemical...

The Hoops Pkg 500 Gal (2) from Snyder Industries is a matched set of two grey steel tank bands, packaged together and weighing about 31 lbs. These are support hoops - a metal accessory that wraps a...

The 4 Inch SCH 80 CPVC Slip Fit Siphon Tube from Snyder Industries is a Schedule 80 CPVC draw tube built for the discharge side of bulk storage and transfer systems. The tube runs 4 inches in nominal...

The Snyder Industries Sight Gauge Assembly (SKU SII-34700973) is a CPVC bulkhead-mounted sight glass with threaded fittings, supplied without valves and sealed with Viton. It is a fitting assembly,...