Tank Fittings

The 3/4 Inch PVC Flange Adapter from Snyder Industries is a PVC pipe-assembly fitting in a 3/4-inch nominal size. It is a plumbing fitting, not a tank, and it belongs to Snyder's Pipe Assemblies line of PVC adapters. What it is Material is PVC, sized at...

The Snyder Industries 3/4 inch socket-by-thread fitting (SKU SII-34700751) pairs a CORZAN CPVC body with a VITON gasket — the materials pairing Snyder supplies for its own tanks. The connection is 3/4 inch nominal; the overall body is 2.75 inches square...

The Norwesco Ladder Adapter Kit (SKU N-62301) is the steel mounting hardware that fits a ladder to a Norwesco 3135 leg tank, giving crews a fixed, repeatable way to reach the top fittings for filling, inspection, and routine service. It is an accessory...

The Norwesco 4 Inch Bulkhead Fitting is a polyethylene through-wall fitting that gives you a sealed, serviceable connection point where a pipe or hose line passes through a tank wall. It carries a 4-inch nominal size and ships as a compact hardware item...

When a standard polyethylene fitting isn't the right call, this Norwesco bolted fitting (part 64253) steps up the material spec. It's a 1-1/2" female NPT double threaded bolted fitting made from 316 stainless steel and paired with an EPDM gasket. As a...

The Norwesco 60485 is a 1-1/2" stainless steel ball valve. It is a full port design, meaning the passage through the valve is sized to the nominal line size rather than necked down. If you need details on pressure rating, thread type, seat material, or...

The 1 1/2 Inch PVC Flange Adapter from Snyder Industries is a PVC pipe-assembly fitting from Snyder's PVC Adapters line. It carries a 1.5 inch nominal connection and ships at roughly 5 lbs. As a flange adapter, it gives a PVC plumbing run a bolt-up...

The 1 1/2 Inch CPVC Threaded Fitting is a Snyder Industries bulkhead fitting that gives a tank a clean, sealed 1.5-inch threaded outlet. The body is CPVC and it ships with an EPDM gasket, so the sealing surface is matched to the fitting from the factory...

The Snyder Industries 1.5 Inch Bolted Double-Flanged Fitting is a polypropylene tank fitting with a double-flange body, stainless steel bolts, and an EPDM gasket. It carries a 1.5-inch flow port, measures roughly 3.5 by 3.5 inches across the flange face,...

The Norwesco 3" Full Port M x F Bolted Ball Valve (part 62047) is a full port ball valve, meaning the valve is designed not to neck down the flow path the way a standard-port valve does. The male x female (M x F) configuration gives you a male thread on...

The Norwesco 3" Single Union Ball Valve (part 60415) is a shutoff valve used in tank plumbing where you need to isolate flow. As the name indicates, this is a single union design: one side of the valve can be disconnected at the union nut, which allows...

The Norwesco 3" Full Port Bolted Ball Valve (part 61720) is built for plumbing runs that need full flow at the 3-inch size. The full port designation indicates the valve is designed not to restrict flow at its rated size, and the blue handle makes...