Skip to main content

Enduraplas

1750 Gallon Plastic Vertical Water Storage Tank in Black

$2,895.90
0
(No reviews yet) Write a Review
Adding to cart… The item has been added
SKU:
901750-1.2-BLK
Weight:
1,050.00 LBS
Width:
76.00 (in)
Height:
95.00 (in)
Depth:
76.00 (in)

The Enduraplas 1750 Gallon Vertical Water Storage Tank (SKU 901750-1.2-BLK) is a black polyethylene bulk-storage tank built for above-ground water storage, rainwater and reuse aggregation, agricultural supply, and rural fire-water reserve. It stands 95 inches tall on a 76-inch-diameter round footprint, giving you serious volume without a sprawling pad. Because the shell is opaque black poly rather than translucent, it blocks light and suppresses algae growth in stored water, which matters when the tank feeds a reuse train or holds a reserve that sits for weeks between draws.

Will it work for your site

Capacity is 1,750 gallons in a vertical, flat-bottom configuration that sits directly on a level pad. The footprint is 76 inches in diameter and overall height is 95 inches, so confirm your door, gate, and overhead clearances against those numbers before delivery, and cross-check SKU 901750-1.2-BLK against the technical drawing on this page when you place a PO. Filled with water this tank carries 14,595 pounds of water weight (water only; tank and fittings are additional), and that load lands entirely on the pad beneath it. Size the foundation to the filled weight, not the empty shell. Our Tank Sizing Calculator and Tank Sizing Guide help you match gallons to demand, and the pad-sizing guide walks the ACI 360R-10 framework for a poly tank base.

The mistake to avoid

The biggest miss on a 1,750-gallon vertical is treating the pad as an afterthought. That 14,595-pound filled weight demands a flat, fully supporting, properly cured base sized for the water load, not the empty tank. A tank set on gravel, uneven ground, or an undersized pad will settle unevenly and stress the shell floor. Run your acceptance fill deliberately and watch for movement. Our hydrostatic test methodology guide covers the water-fill discipline, settlement monitoring, and hold-time math that catch problems before the tank is in service.

Water reuse and fire reserve

At this size the tank fits naturally into a grey-water, rainwater, or HVAC-condensate aggregation train, and into a rural or remote fire-water reservoir. If your reserve is part of a private fire-protection stack, the NFPA 22 fire-water reservoir guide covers sizing discipline and freeze protection for cold-climate service. For multi-quality storage, the water reuse topology guide lays out quality-banded storage trains and treatment sequencing.

This tank ships LTL freight, quoted live to your delivery ZIP. Get a real number from our Freight Cost Estimator or call 866-418-1777 and we will walk you through delivery, offload, and pad readiness before the truck rolls.

Adding to cart… The item has been added