The Enduraplas TLV01750BE is a 1,750-gallon vertical water storage tank molded in beige polyethylene, built for bulk water storage where a tall, compact footprint matters more than floor space. It stands 89 inches tall on an 85 x 85-inch footprint, so it holds substantial volume without sprawling across a pad. This is the kind of vertical storage tank that anchors rural fire-water reserves, irrigation supply, rainwater collection, and general water holding.
Will it work for your site?
The tank is rated to a 1.1 specific gravity, which gives you headroom above plain water (SG 1.0) for water carrying sediment or light dissolved solids. Filled with water, the contents weigh roughly 14,595 lb, and the tank is engineered to carry up to about 16,055 lb of rated contents. That maximum spread across the 85 x 85-inch footprint works out to roughly 320 lb per square foot, so your pad and subgrade have to support that distributed load, not just the empty tank. Plan accordingly: those numbers are the load your foundation carries, not a suggestion. For a stable, level base under a tank this size, work through our concrete pad sizing guidance before the tank arrives. If you are still confirming whether 1,750 gallons is the right capacity for your draw and refill rate, the Tank Sizing Calculator and Tank Sizing Guide will help you size it against real demand.
Why beige, and what the SG rating really means
The opaque beige wall blocks light far better than translucent or natural poly, which suppresses algae growth in stored water and adds UV protection for outdoor service. Keep this tank in water-storage duty: the 1.1 specific gravity ceiling covers water and lightly laden water with sediment or light dissolved solids, and nothing heavier. It is not rated for chemical service. If your application sits above 1.1 SG, this is the wrong tank, and pushing it past that ceiling is the fastest way to over-stress the wall.
Fittings and commissioning
Outlet, inlet, and manway configuration are confirmed at order rather than estimated from a photo, so call 866-418-1777 to verify fitting locations and sizes before you plumb. When the tank is set and connected, do not skip a proper acceptance fill. Our hydrostatic test methodology walks through fill discipline, pad settlement monitoring, fitting leak detection, and hold-time math so you catch a problem before the tank is in service.
One mistake to avoid
The most common error with a vertical water tank this size is underbuilding the foundation. At nearly 16,000 lb of rated contents on an 85-inch-square footprint, an unlevel or under-spec pad invites settlement, stress on the tank wall, and fitting strain. For planning a larger reserve, our fire-water reservoir design guide and industrial water reuse topology guide cover banded storage and reuse trains in depth.
This water storage tank ships LTL freight from the Enduraplas plant in Converse, TX, with the rate quoted live to your ZIP. At 89 inches tall it is an oversize freight piece, so confirm delivery access and unloading equipment (a forklift or liftgate) at your site when you order. Get a real number before you buy with our Freight Cost Estimator, or call 866-418-1777 and we will work out delivery. List price is shown above and is before freight.
